06-09-2015, 04:45 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Interior Guides
- Mercedes-Benz C-Class: How to Remove Door Trim Panel
Step by step instructions for do-it-yourself repairs
Browse all: Interior Guides
Door panels removal
05-07-2009, 06:01 PM
#2
MBWorld Fanatic!
Join Date: Apr 2008
Location: Chino Hills, CA
Posts: 3,809
Likes: 0
Received 4 Likes
on
3 Posts
Mercedes C300 Sport, BMW 745Li, VW Mk6 Golf TDI
I was trying to figure this out too (https://mbworld.org/forums/c-class-w...ff-before.html).
Here's a diagram courtesy of Vic Viper
I was planning on covering the interior doors with Damplifier Pro. I saw the two bolts under the handle, but that's as far as I got. I tried prying it a bit from the sides, but didn't want to break anything.
Here's a diagram courtesy of Vic Viper
I was planning on covering the interior doors with Damplifier Pro. I saw the two bolts under the handle, but that's as far as I got. I tried prying it a bit from the sides, but didn't want to break anything.
05-07-2009, 09:27 PM
#3
MBWorld Fanatic!
I was trying to figure this out too (https://mbworld.org/forums/c-class-w...ff-before.html).
Here's a diagram courtesy of Vic Viper
I was planning on covering the interior doors with Damplifier Pro. I saw the two bolts under the handle, but that's as far as I got. I tried prying it a bit from the sides, but didn't want to break anything.
Here's a diagram courtesy of Vic Viper
I was planning on covering the interior doors with Damplifier Pro. I saw the two bolts under the handle, but that's as far as I got. I tried prying it a bit from the sides, but didn't want to break anything.
05-07-2009, 10:29 PM
#5
MBWorld Fanatic!
05-08-2009, 02:06 AM
#6
Senior Member
Join Date: Aug 2008
Location: British Columbia
Posts: 436
Likes: 0
Received 2 Likes
on
2 Posts
2011 E350 4 Matic
I was trying to figure this out too (https://mbworld.org/forums/c-class-w...ff-before.html).
Here's a diagram courtesy of Vic Viper
I was planning on covering the interior doors with Damplifier Pro. I saw the two bolts under the handle, but that's as far as I got. I tried prying it a bit from the sides, but didn't want to break anything.
Here's a diagram courtesy of Vic Viper
I was planning on covering the interior doors with Damplifier Pro. I saw the two bolts under the handle, but that's as far as I got. I tried prying it a bit from the sides, but didn't want to break anything.
Trending Topics
05-08-2009, 09:31 PM
#8
Senior Member
Join Date: Oct 2007
Location: Reston, VA
Posts: 328
Likes: 0
Received 1 Like
on
1 Post
15 E350 4Matic
Mike or Norm,
If you do pull all your doors apart, could you kindly try to see if you can tell what are the color of the wire that is feeding the bulb on the bottom of each door. I pulled one of the bulb out before but it was some generic blue flat ribbon wire. It must become some color wire at the edge of the door.
If you do pull all your doors apart, could you kindly try to see if you can tell what are the color of the wire that is feeding the bulb on the bottom of each door. I pulled one of the bulb out before but it was some generic blue flat ribbon wire. It must become some color wire at the edge of the door.
05-09-2009, 06:37 PM
#9
Junior Member
Join Date: Sep 2008
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
C 350
05-09-2009, 08:05 PM
#10
MBWorld Fanatic!
Join Date: Apr 2008
Location: Chino Hills, CA
Posts: 3,809
Likes: 0
Received 4 Likes
on
3 Posts
Mercedes C300 Sport, BMW 745Li, VW Mk6 Golf TDI
I just finished the wheel well area and the top back (where the speakers are) in the trunk. PITA. Lesson learned....wear gloves. The aluminum foil is sharp. Sorry didn't take any pics of the install, but there are plenty on youtube of how it's installed. I kinda got lazy and didn't remove the trim around the wheel well and resorted to sticking pieces in through the access ports. Took it out for a spin and did notice a drop in sound and drone, but still could use some work. Tomorrow I'm going to do the trunk door and see how that turns out. Then if I need more, I'll start on the side doors.
