Tightening torque for flywheel to torque converter
05-15-2011, 10:49 AM
#1
Junior Member
Thread Starter
Join Date: Sep 2009
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
1999 E320
Tightening torque for flywheel to torque converter
What would be the proper tightening torque for bolts connecting flywheel with torque converter ? I have to remove the transmission on my 99 E320 to replace the input shaft seal. Your help will be appreciated.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
05-15-2011, 02:09 PM
#2
MBWorld Fanatic!
Join Date: Apr 2007
Posts: 6,170
Likes: 0
Received 14 Likes
on
11 Posts
300E a couple 1994 w124wagon E320 Wagon/,1971MGB Track/Rally, MG Midget Autocross ,2000 E320 wagon.
Standard bolts
Most modern and some older benz run 42nm flex plate to converter do it in 2 steps.
be sure to fill properly and measure at 80c operating temp
use 722.6 spec fluid like valvoline maxlife nag1/722.6 spec
be sure to fill properly and measure at 80c operating temp
use 722.6 spec fluid like valvoline maxlife nag1/722.6 spec
