First ADV.1 W203 Coming...
02-19-2012, 03:08 PM
#1
Member
Thread Starter
Join Date: Jan 2011
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
2005 C230K SS 6-Spd
First ADV.1 W203 Coming...
Stay tuned... should have them within 3 weeks. Mounting will be weather dependent on snowfall into spring.
19X8.5, 19X10 ADV5.1 Monoblocks, Brushed Aluminum w/Clear.
19X8.5, 19X10 ADV5.1 Monoblocks, Brushed Aluminum w/Clear.
Trending Topics
03-24-2012, 09:28 PM
#15
Member
Thread Starter
Join Date: Jan 2011
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
2005 C230K SS 6-Spd
275 fits fine. As long as you get the right offset dialed in it's gravy. Put 150 miles on the setup today - no rubbing anywhere. Pics in a bit.
Last edited by LegitLifeStyle; 03-24-2012 at 10:02 PM.
03-24-2012, 09:54 PM
#16
Member
Thread Starter
Join Date: Jan 2011
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
2005 C230K SS 6-Spd
Here we go...
And a quick p-chop of it lowered a bit more...
Other than going coilovers (which I really want to avoid if possible as this is my "keep is stock, reliable, and useable DD") does anyone make a spring package that removes the front wheel gap? The rear looks almost perfect but the front is still about an 1" too high.
I had heard the Renntech C32 springs might have the appropriate rake? Anyone know?
Cheers!
And a quick p-chop of it lowered a bit more...
Other than going coilovers (which I really want to avoid if possible as this is my "keep is stock, reliable, and useable DD") does anyone make a spring package that removes the front wheel gap? The rear looks almost perfect but the front is still about an 1" too high.
I had heard the Renntech C32 springs might have the appropriate rake? Anyone know?
Cheers!
03-24-2012, 11:19 PM
#17
Super Member
Dont know to much about suspensions ... may want to ask Phister or CoupeCrazy on that
but those rims look great, my favorite style by ADV1
but those rims look great, my favorite style by ADV1
03-24-2012, 11:45 PM
#18
MBworld Guru
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
Looks good.
As far as springs go, renntech indeed has the right height if you set the rear with #4 pads. Search around, you probably will see one of my pic with the lm-6 lorinser rep wheels or with HRE or with Carlsson wheels. Just search renntech c32 springs on google for the image.
As far as springs go, renntech indeed has the right height if you set the rear with #4 pads. Search around, you probably will see one of my pic with the lm-6 lorinser rep wheels or with HRE or with Carlsson wheels. Just search renntech c32 springs on google for the image.
Last edited by FrankW; 03-24-2012 at 11:47 PM.
03-25-2012, 01:32 AM
#21
MBWorld Fanatic!
Join Date: Jan 2010
Location: MICHIGAN
Posts: 1,073
Likes: 0
Received 0 Likes
on
0 Posts
2001 E55 - 2008 CLS63 -2016 F-150
wheels looks pimp ..
but I think its going to rub out on the rear once you drop it . Might not rub at a stance but once u stab the throttle
but I think its going to rub out on the rear once you drop it . Might not rub at a stance but once u stab the throttle
03-25-2012, 04:06 AM
#22
Moderator Alumni
Looks good! Front could go down a bit, but the rear looks spot on! Whats your final offset for running 275? I know most folks run et 35 and 265. Yall think we could run 275 on et 30 paired w/ some tab grinding and slight fender rolling? :x
