--e55 amg dipstick oil?? what are you using--
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
--e55 amg dipstick oil?? what are you using--
just thought id ask and see if any of you actually have dipsticks on your engines... i heard the ml430 has the exact measurement as the 55!!!
MBWorld Fanatic!
Joined: Jan 2007
Posts: 1,359
Likes: 6
ML550
Buy the factory tool dipstick if you want to check the level manually. Unfortunately, it's not designed to actually remain in the engine like a traditional dipstick, but it works really well when used. I'm pretty sure a search here would probably yield the MB part number for it since I know this has been discussed before.
Trending Topics
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
hold your horses guys i think i have found our solution... just went to the dealer and ordered a ml430 dipstick and they are the same exact fitment and it was 21 dollars
part number is 113.010.04.72
part number is 113.010.04.72
MB World Stories
The Best of Mercedes & AMG
7 Craziest Things AMG Gas Ever Built
Verdad Gallardo
New Electric Mercedes-AMG GT 4-Door Coupe Unveiled: 10 Things You Need to Know
Verdad Gallardo
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
Buy the factory tool dipstick if you want to check the level manually. Unfortunately, it's not designed to actually remain in the engine like a traditional dipstick, but it works really well when used. I'm pretty sure a search here would probably yield the MB part number for it since I know this has been discussed before.
MBWorld Fanatic!
Joined: Jan 2007
Posts: 1,359
Likes: 6
ML550
No, the factory tool is not designed to be left in the engine while it's running. It is calibrated in milliliters, and you compare the reading on the dipstick to the chart that's published in the WIS. Based on the reading, you know how much oil to add or delete. It's very precise, and it's a good thing not to overfill this engine.
I wouldn't trust that a dipstick designed for use in another engine is calibrated correctly for the M113K engine. The only way I would trust it is to take measurements using my factory tool, set the oil fill level to perfect specification, and then check the reading on the ML430 dipstick. You could then mark that dipstick for the exact fill level required for the M113K engine.
Is the one you ordered designed to be left in the engine?
I wouldn't trust that a dipstick designed for use in another engine is calibrated correctly for the M113K engine. The only way I would trust it is to take measurements using my factory tool, set the oil fill level to perfect specification, and then check the reading on the ML430 dipstick. You could then mark that dipstick for the exact fill level required for the M113K engine.
Is the one you ordered designed to be left in the engine?
Last edited by komp55; Apr 26, 2012 at 05:27 PM.
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
No, the factory tool is not designed to be left in the engine while it's running. It is calibrated in milliliters, and you compare the reading on the dipstick to the chart that's published in the WIS. Based on the reading, you know how much oil to add or delete. It's very precise, and it's a good thing not to overfill this engine.
I wouldn't trust that a dipstick designed for use in another engine is calibrated correctly for the M113K engine. The only way I would trust it is to take measurements using my factory tool, set the oil fill level to perfect specification, and then check the reading on the ML430 dipstick. You could then mark that dipstick for the exact fill level required for the M113K engine.
Is the one you ordered designed to be left in the engine?
I wouldn't trust that a dipstick designed for use in another engine is calibrated correctly for the M113K engine. The only way I would trust it is to take measurements using my factory tool, set the oil fill level to perfect specification, and then check the reading on the ML430 dipstick. You could then mark that dipstick for the exact fill level required for the M113K engine.
Is the one you ordered designed to be left in the engine?
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
but i also came across this but this might be just to measure not one that stays in
http://www.ebay.co.uk/itm/Mercedes-B...d=336498219707
http://www.ebay.co.uk/itm/Mercedes-B...d=336498219707
MBWorld Fanatic!
Joined: Jan 2007
Posts: 1,359
Likes: 6
ML550
In the interest of science, I'll spend $15 at my online parts supplier and buy the dipstick you mention, compare its readings to those of the factory tool, and report my findings. I'm old school and trust what I can see rather than relying on an electronic sensor which has been known to fail on occasion.
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
id rather do the same thing... i dont trust no sensors
i just got a message on my dash "reduce oil level or something" i've had my oil changed about 2500 miles ago was measured twice with that measuring dip stick and was perfect so am thinking my sensor is failing... if so is this the one?
http://www.autohausaz.com/search/pro...Level%20Sender
i just got a message on my dash "reduce oil level or something" i've had my oil changed about 2500 miles ago was measured twice with that measuring dip stick and was perfect so am thinking my sensor is failing... if so is this the one?
http://www.autohausaz.com/search/pro...Level%20Sender
MBWorld Fanatic!
Joined: Nov 2005
Posts: 5,692
Likes: 5
none
Doesnt make sense but
http://www.ebay.com/itm/DORMAN-917-3...-/200812846531
honestly dont think the same dipstick fits all these vehicles.
http://www.ebay.com/itm/DORMAN-917-3...-/200812846531
honestly dont think the same dipstick fits all these vehicles.
Last edited by moosejaw; Dec 26, 2012 at 10:07 AM.
Senior Member
Joined: Oct 2011
Posts: 419
Likes: 3
From: Southern Maryland USA
06 E55 AMG, 13 C63 AMG
I just ordered the factory dipstick 120 589 07 21 00
It does not seem to go all the way into the dip stick tube and appears to bottom out.
Is this typical? If so, how do you know it is in far enough? I have about 7 inches poked out of the top.
G
It does not seem to go all the way into the dip stick tube and appears to bottom out.
Is this typical? If so, how do you know it is in far enough? I have about 7 inches poked out of the top.
G
SPONSOR
Joined: Jul 2007
Posts: 5,459
Likes: 152
From: Houston/ Austin /Toronto / UAE / Minneapolis / Orlando /Cincinnati
Eurocharged Performance ML63 and TT lambo
Just jam it in there until it bottoms then take the reading....
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
MBWorld Fanatic!
Joined: Jun 2007
Posts: 1,378
Likes: 4
From: Bloomingdale,IL
2004 W211 E55K, GL550
MBWorld Fanatic!
Joined: Jul 2009
Posts: 3,530
Likes: 387
Only MBs - the best or nothing
Member
Joined: Sep 2014
Posts: 190
Likes: 4
Subies
Older thread, but interesting. I would much rather have one to check.
This whole thread is a bit uncertain.
has anyone does this? It looks like just the stick is for sale on Amazon, do you have to buy the tube also?
Anyone have confirmation? Pics? Comparisons to OEM tool?
Searching a bit more shows that the bright red cap in the middle top of the motor is the oil dipstick tube. It just needs a dipstick?
This whole thread is a bit uncertain.
has anyone does this? It looks like just the stick is for sale on Amazon, do you have to buy the tube also?
Anyone have confirmation? Pics? Comparisons to OEM tool?
Searching a bit more shows that the bright red cap in the middle top of the motor is the oil dipstick tube. It just needs a dipstick?
Last edited by 95ONE; Dec 3, 2014 at 12:42 AM.
