06-10-2015, 01:35 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Engine Guides
- Mercedes-Benz C-Class AMG: How to Replace PCV Valve
Step by step instructions for do-it-yourself repairs
Browse all: Engine Guides
PCV valve location on the 2002 c230 2 door kompressor
07-01-2013, 03:31 PM
#1
Newbie
Thread Starter
Join Date: Jul 2013
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2002 Mercedes c230
PCV valve location on the 2002 c230 2 door kompressor
I need to replace my PCV valve do to failure but I can't seem to find it. Does anyone know the specific location of it. Any pics would be greatly appreciatedd.
Thanks.
Thanks.
05-16-2015, 11:37 PM
#2
Member
I've got the same question. Rather than a new post, I found this thread. Our car is also the 2002 model. Is there a diagram somewhere showing the location of various parts?
05-17-2015, 10:57 AM
#4
Member
I did that search before posting yesterday, and none of the results were useful. Some even say that the 2002 engine has no PCV valve, just the oil-air separator.
05-21-2015, 06:46 PM
#5
MBWorld Fanatic!
Join Date: Jan 2006
Location: Pasadena, CA
Posts: 3,206
Likes: 0
Received 6 Likes
on
5 Posts
2002 C230K, 2013 BMW 328, 2015 BMW X5
I don't know why I'm getting sucked back in.....
The code you are getting is from a breather that can clog. If memory serves....and it has been years since I turned a wrench on an M111, you will see a brass looking canister the size of a small childs fist at the rear of the engine above the transmission tunnel. It gets clogged and the lack of vacuum causes the trouble code.
Feel free to critique my input, but this is how I recall clearing that trouble code after many resets.
The code you are getting is from a breather that can clog. If memory serves....and it has been years since I turned a wrench on an M111, you will see a brass looking canister the size of a small childs fist at the rear of the engine above the transmission tunnel. It gets clogged and the lack of vacuum causes the trouble code.
Feel free to critique my input, but this is how I recall clearing that trouble code after many resets.
