W211 AMG Discuss the W211 AMG's such as the E55 and the E63
Sponsored by:
Sponsored by:

P200A code?

Old 11-18-2013, 03:43 PM
  #1  
MBWorld Fanatic!
Thread Starter
 
chawkins2001's Avatar
 
Join Date: Jan 2009
Location: Atlanta
Posts: 7,658
Received 65 Likes on 55 Posts
2006 E55 AMG
P200A code?

Anyone know what this code is, and figure out what the cause and fix is:

P200A code?-bec0b31f-7b95-4dc7-97f4-eba63df3f266.jpg

Last edited by chawkins2001; 11-19-2013 at 09:12 AM.
Old 11-18-2013, 03:50 PM
  #2  
MBWorld Fanatic!
 
E55Greasemonkey's Avatar
 
Join Date: Jul 2012
Location: Orbiting the planet
Posts: 4,479
Received 1,482 Likes on 983 Posts
This place is a joke.
First check the trans control unit for trans fluid intrusion, if there is none,we typically clear that code and if the car shifts fine we send it on it's way. If it does not shift fine then likely the trans control unit has failed internally.
Old 11-18-2013, 03:53 PM
  #3  
MBWorld Fanatic!
Thread Starter
 
chawkins2001's Avatar
 
Join Date: Jan 2009
Location: Atlanta
Posts: 7,658
Received 65 Likes on 55 Posts
2006 E55 AMG
I got the code at the track and checked the TCU for fluid and looked at the board. No fluid and the board look fine so I cleared the code. The car would fall on its face giving it any sort of medium to heavy throttle after the code was cleared.

I have never seen a EGS fail, have any of you fellas?
Old 11-18-2013, 04:00 PM
  #4  
MBWorld Fanatic!
 
E55Greasemonkey's Avatar
 
Join Date: Jul 2012
Location: Orbiting the planet
Posts: 4,479
Received 1,482 Likes on 983 Posts
This place is a joke.
I have seen them fail. It's not very common, but neither are the mods on your car

Did you try clearing the fault and resetting the shift adaptations at the same time?
Old 11-18-2013, 04:08 PM
  #5  
MBWorld Fanatic!
Thread Starter
 
chawkins2001's Avatar
 
Join Date: Jan 2009
Location: Atlanta
Posts: 7,658
Received 65 Likes on 55 Posts
2006 E55 AMG
Originally Posted by E55Greasemonkey
I have seen them fail. It's not very common, but neither are the mods on your car

Did you try clearing the fault and resetting the shift adaptations at the same time?
I sure did bro I do have a spare TCU I will try out and see if that one works.
Old 11-18-2013, 04:42 PM
  #6  
MBWorld Fanatic!
 
E55Greasemonkey's Avatar
 
Join Date: Jul 2012
Location: Orbiting the planet
Posts: 4,479
Received 1,482 Likes on 983 Posts
This place is a joke.
That code can also show up if the ecu and valve body are not compatible parts. Did you put a different trans in the car?
Old 11-18-2013, 04:47 PM
  #7  
MBWorld Fanatic!
 
Denroll's Avatar
 
Join Date: Oct 2011
Location: A to the Z (the state)
Posts: 2,279
Likes: 0
Received 25 Likes on 20 Posts
'06 E55
Oh hey, look... it's a code I haven't had.

And here I thought I had collected 'em all.
The following users liked this post:
CooperK (04-11-2023)
Old 11-19-2013, 05:57 AM
  #8  
Super Member
 
211.070's Avatar
 
Join Date: Jun 2012
Location: Atlanta, GA
Posts: 714
Received 7 Likes on 7 Posts
2005- E55, 2007 GL450, 94 B3000
I have seen this fault numerous times. The majority of the time there are no side effects whatsoever. If you have cleared it , and it returns. You have an internal processing failure of the EGS control unit.
Old 11-19-2013, 08:43 AM
  #9  
MBWorld Fanatic!
Thread Starter
 
chawkins2001's Avatar
 
Join Date: Jan 2009
Location: Atlanta
Posts: 7,658
Received 65 Likes on 55 Posts
2006 E55 AMG
After checking my notes on my build, I have figured out what the code came from. If get a TCU tune from a vendor, and choose to do it with a different EGS other than the one that originally came with your car, this code will remain stored if you don't VIN code the new EGS.
Old 11-19-2013, 09:05 AM
  #10  
MBWorld Fanatic!
 
99lightning's Avatar
 
Join Date: Dec 2011
Location: new ringgold pa
Posts: 1,482
Likes: 0
Received 25 Likes on 24 Posts
99 ford lightning
so i shouldnt get that code since i sent my original tcu out
Old 11-19-2013, 09:13 AM
  #11  
MBWorld Fanatic!
Thread Starter
 
chawkins2001's Avatar
 
Join Date: Jan 2009
Location: Atlanta
Posts: 7,658
Received 65 Likes on 55 Posts
2006 E55 AMG
You are correct brotha.
Old 12-30-2013, 11:49 PM
  #12  
Member
 
Mulletmudbogger's Avatar
 
Join Date: Oct 2013
Posts: 77
Likes: 0
Received 1 Like on 1 Post
Bus Honda accord bus
Originally Posted by chawkins2001
I sure did bro I do have a spare TCU I will try out and see if that one works.

Any updates?

My e55 is throwing the same code. Not sure how long it's been throwing it because I just got das.

My Tcu connector was wet and my board had a small spot of fluid inside.
I cleaned everything replaced the leaking trans connector and I'm still getting this code.


I think my Tcu is fried and the transmission shop will not look at my noisy transmission until I get that code cleared so I've ordered a new Tcu.
Old 12-31-2013, 10:14 PM
  #13  
Member
 
Mulletmudbogger's Avatar
 
Join Date: Oct 2013
Posts: 77
Likes: 0
Received 1 Like on 1 Post
Bus Honda accord bus
Here what you don't want to see on your Tcu connection behind the passenger floor carpet.
Attached Thumbnails P200A code?-image-2169370022.jpg  
Old 08-26-2019, 10:14 AM
  #14  
Junior Member
 
C55er's Avatar
 
Join Date: Jun 2013
Location: Canada
Posts: 69
Received 4 Likes on 4 Posts
C55 AMG
I know this is an old thread, but I'm going to try my luck anyway. How would you VIN code the TCU? Thanks in advance.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: P200A code?



All times are GMT -4. The time now is 12:30 PM.