Any good ADV1 wheel vendors on here?
11-05-2016, 03:00 PM
#1
Member
Thread Starter
Any good ADV1 wheel vendors on here?
Can someone refer me to a good wheel vendor? I had ordered a set but turns out the offset given to me verbally over the phone was incorrect from the actual wheels. So I will be cancelling that order. It was too bad because the vendor and a real pleasure to deal with.
Anyhow, I'm looking for a set of ADV1 wheels (similar to the one I had ordered with the incorrect offset). Please refer me some reputable dealers.
Thanks
Anyhow, I'm looking for a set of ADV1 wheels (similar to the one I had ordered with the incorrect offset). Please refer me some reputable dealers.
Thanks
11-05-2016, 05:11 PM
#4
Member
Thread Starter
Originally I wanted the ADV10 MV2 CS.
However, since Renntech had a very similar 10-spoke design in stock (also manufactured by ADV1 to RENNTech's specs (private label), I placed the order with Renntech. Minutes prior to UPS picking up the wheels, we realized the offset we had discussed over the phone wasn't quite accurate. Although they would fit the GTS just fine, but I will be lowering my vehicle and will run negative camber so I had wanted a more aggressive offset.
So now I'm back to where I started with the ADV10.
The ADV10 seem to have 2 spoke designs. I'm leaning toward the one on the blue Lambo.
However, since Renntech had a very similar 10-spoke design in stock (also manufactured by ADV1 to RENNTech's specs (private label), I placed the order with Renntech. Minutes prior to UPS picking up the wheels, we realized the offset we had discussed over the phone wasn't quite accurate. Although they would fit the GTS just fine, but I will be lowering my vehicle and will run negative camber so I had wanted a more aggressive offset.
So now I'm back to where I started with the ADV10.
The ADV10 seem to have 2 spoke designs. I'm leaning toward the one on the blue Lambo.
11-15-2016, 03:19 PM
#6
Member
Thread Starter
Agreed! I'm going with the wheels on the blue Lambo.
As for offsets:
FRONT 20×10 ET60 Tires: 265/30/20
REAR 21×11.5 ET59 Tires: 305/25/21
(This effectively pushes the wheels out 15mm front and rear)
I didn't want to go with a 12" rear because I'm not making crazy HP and I don't plan to. I don't want to drag around all that weight. I figure the offset will already give me that hella flush look without protruding out too much.
As for offsets:
FRONT 20×10 ET60 Tires: 265/30/20
REAR 21×11.5 ET59 Tires: 305/25/21
(This effectively pushes the wheels out 15mm front and rear)
I didn't want to go with a 12" rear because I'm not making crazy HP and I don't plan to. I don't want to drag around all that weight. I figure the offset will already give me that hella flush look without protruding out too much.
Last edited by 300blackout; 11-15-2016 at 03:23 PM.
