1996 C220 CPS Problem
06-16-2013, 04:43 PM
#1
Newbie
Thread Starter
Join Date: Nov 2008
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
w140 s420
1996 C220 CPS Problem
I have 1996 C220 that's having problems with CPS sensor
64 Crankshaft position sensor signal : not recognized/implausible
Recently i did a head job on it and after that it started having this problem
I have changed 2 CPS sensors already since, i know that they do go bad.
any advice appropriated
Symptoms
It cracks but won't start
I did a head job according to WIS marks etc.....
I know it's not a security (since light on rear view mirror) are not flushing when cranking engine
64 Crankshaft position sensor signal : not recognized/implausible
Recently i did a head job on it and after that it started having this problem
I have changed 2 CPS sensors already since, i know that they do go bad.
any advice appropriated
Symptoms
It cracks but won't start
I did a head job according to WIS marks etc.....
I know it's not a security (since light on rear view mirror) are not flushing when cranking engine
Last edited by cataha; 06-16-2013 at 04:53 PM.
09-23-2013, 04:52 PM
#2
Newbie
Thread Starter
Join Date: Nov 2008
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
w140 s420
I have 1996 C220 that's having problems with CPS sensor
64 Crankshaft position sensor signal : not recognized/implausible
Recently i did a head job on it and after that it started having this problem
I have changed 2 CPS sensors already since, i know that they do go bad.
any advice appropriated
Symptoms
It cracks but won't start
I did a head job according to WIS marks etc.....
I know it's not a security (since light on rear view mirror) are not flushing when cranking engine
64 Crankshaft position sensor signal : not recognized/implausible
Recently i did a head job on it and after that it started having this problem
I have changed 2 CPS sensors already since, i know that they do go bad.
any advice appropriated
Symptoms
It cracks but won't start
I did a head job according to WIS marks etc.....
I know it's not a security (since light on rear view mirror) are not flushing when cranking engine
The problem and solutions:
1) Wiring (solution, Liquid tape + shrink tubing)
2) CPS Plug (solution, replaced cable with plug from another car)
Hope it'll help to others when they need it!
