Official C-Class Picture Thread
#6676
Senior Member
2003 C320 Sport
Hey all wanted to share my new kicks -- Vossen CVT Sorry about the bad pics and dirty car but just got finished working on it :P
19x8.5 frt 235/35
19x10 rear 275/30 (yes they fit with no fender rolling/pulling/cutting but still stock height--will see once I drop it a little)
Original wheels were appx 23mm from rim to outside of fender and 39mm rear. New wheels flush frt and 4mm rear.
Originally when I bought it
New Grille and Flush Emblem
New Vossens
19x8.5 frt 235/35
19x10 rear 275/30 (yes they fit with no fender rolling/pulling/cutting but still stock height--will see once I drop it a little)
Original wheels were appx 23mm from rim to outside of fender and 39mm rear. New wheels flush frt and 4mm rear.
Originally when I bought it
New Grille and Flush Emblem
New Vossens
#6677
Junior Member
Join Date: Jul 2013
Location: Fresno, California
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
2006 C350 Sport, 2010 S550, 2014 RAM 1500 EcoDiesel
nice!
Just got a dual exhaust installed on the C230K, sorry for the phone camera pictures, super sunny outside.
Exhaust custom fabricated at a shop in Sacramento, CA (Muffler Tech on Florin Road). It uses magnaflow so a bit noisy inside, but overall, I'm happy. The tips are oval and as close to the stock tip as I could find.
Other Major Stuff:
-Lowered on H&R springs.
-Rims are being worked on and should get it on with new tires in November.
Other Minor Stuff:
- black grill, flat hood emblem, clear corners, 5k leds replacing all bulbs, trunk badge delete, trunk lip
Exhaust custom fabricated at a shop in Sacramento, CA (Muffler Tech on Florin Road). It uses magnaflow so a bit noisy inside, but overall, I'm happy. The tips are oval and as close to the stock tip as I could find.
Other Major Stuff:
-Lowered on H&R springs.
-Rims are being worked on and should get it on with new tires in November.
Other Minor Stuff:
- black grill, flat hood emblem, clear corners, 5k leds replacing all bulbs, trunk badge delete, trunk lip
#6678
#6690
Junior Member
Join Date: Feb 2014
Location: NORCAL
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
2005 C230 Sedan
CF Front Lip & Rear Diffuser Installed
I picked up a cf front lip from one of our sponshors here (Gary@Suvneer). It didn't come with any mounting hardware or any pre-drilled holes like some of the other members got, but it wasn't too hard to do it. I had a friend help.
The rear diffuser I got on ebay. At first I was sad because after doing the dual exhaust mod, there wasn't enough clearance to slide it in. I was planning on selling it but then I went back to the exhaust shop and told them about it and they rewelded it for me free. I was able to fit the diffuser in so the next thing was to actually install it. The material and fitment is pretty bad, just like what everyone said. I found a body shop that was able to install it for me. They used some heavy duty glue and had it clamped on for the weekend and used 2 bolts at the bottom left/right sides to secure it even more. I painted the bolts black so it wouldn't stand out too much. There was also a gap between the diffiuser and the bumper since they couldn't get it flush. I use some trim weather stripping to line the edges and fill the gap. Turned out pretty good.
The rear diffuser I got on ebay. At first I was sad because after doing the dual exhaust mod, there wasn't enough clearance to slide it in. I was planning on selling it but then I went back to the exhaust shop and told them about it and they rewelded it for me free. I was able to fit the diffuser in so the next thing was to actually install it. The material and fitment is pretty bad, just like what everyone said. I found a body shop that was able to install it for me. They used some heavy duty glue and had it clamped on for the weekend and used 2 bolts at the bottom left/right sides to secure it even more. I painted the bolts black so it wouldn't stand out too much. There was also a gap between the diffiuser and the bumper since they couldn't get it flush. I use some trim weather stripping to line the edges and fill the gap. Turned out pretty good.
Last edited by danny2slick; 11-25-2014 at 03:50 PM. Reason: resized photos smaller
#6691
2003 W203 C240
Tein springs, S-class tail lights, Eagle eye headlights, carbon fiber roof and rear spoiler, black vinyl roof wrapped by Don Nuygen, E55 AMG wheels finished in anthracite gray, led interior and license plate light conversion and a turnt up europlate for fun(it's off center in the picture, but is now centered) . Windows 5% rear, 15% front, Airblue 80% front windshield.
Next mods: Illuminated side sills, euro license plate trunk insert, eisenmann exhaust, sport front and rear bumper, euro impact strips, ecu tune, intake, coilovers
Last edited by lawrencecheng; 12-12-2014 at 09:57 PM.
#6693
Senior Member
I picked up a cf front lip from one of our sponshors here (Gary@Suvneer). It didn't come with any mounting hardware or any pre-drilled holes like some of the other members got, but it wasn't too hard to do it. I had a friend help.
The rear diffuser I got on ebay. At first I was sad because after doing the dual exhaust mod, there wasn't enough clearance to slide it in. I was planning on selling it but then I went back to the exhaust shop and told them about it and they rewelded it for me free. I was able to fit the diffuser in so the next thing was to actually install it. The material and fitment is pretty bad, just like what everyone said. I found a body shop that was able to install it for me. They used some heavy duty glue and had it clamped on for the weekend and used 2 bolts at the bottom left/right sides to secure it even more. I painted the bolts black so it wouldn't stand out too much. There was also a gap between the diffiuser and the bumper since they couldn't get it flush. I use some trim weather stripping to line the edges and fill the gap. Turned out pretty good.
The rear diffuser I got on ebay. At first I was sad because after doing the dual exhaust mod, there wasn't enough clearance to slide it in. I was planning on selling it but then I went back to the exhaust shop and told them about it and they rewelded it for me free. I was able to fit the diffuser in so the next thing was to actually install it. The material and fitment is pretty bad, just like what everyone said. I found a body shop that was able to install it for me. They used some heavy duty glue and had it clamped on for the weekend and used 2 bolts at the bottom left/right sides to secure it even more. I painted the bolts black so it wouldn't stand out too much. There was also a gap between the diffiuser and the bumper since they couldn't get it flush. I use some trim weather stripping to line the edges and fill the gap. Turned out pretty good.
#6694
Former Vendor of MBWorld
I have the front lip in stock. $260 shipped. It fits the C32 or W203 AMG front bumper. Email me your paypal email and phone #.
Gary@suvneer.com
Gary@suvneer.com
#6695
Senior Member
I have the front lip in stock. $260 shipped. It fits the C32 or W203 AMG front bumper. Email me your paypal email and phone #.
Gary@suvneer.com
Gary@suvneer.com
#6697
Junior Member
Join Date: Jul 2012
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
2001 Mercedes c320 Sport, 2000 ML320(sold), 2001 C320 silver(sold), 1999 E320(sold), 2001 C240(RIP)
2001 C320
Just wanted to share my recent purchase of a 2001 Magma Red C320! Bought it for $3800 with 120k on the clock.
#6698
Senior Member
#6699
Junior Member
Join Date: Jul 2012
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
2001 Mercedes c320 Sport, 2000 ML320(sold), 2001 C320 silver(sold), 1999 E320(sold), 2001 C240(RIP)
#6700
Member
Join Date: Sep 2013
Location: Finland, Europe
Posts: 139
Likes: 0
Received 3 Likes
on
3 Posts
W203 C200CDI
Here is some pics of my crappy car. Done 240k+ miles. Happy holidays for everybody
Last edited by cvx; 12-24-2014 at 09:01 AM.