Expression Aero Kit

nukblazi · 04-12-2003, 02:45 PM

I saw an advertisement in Benzo for http://www.expression.be I really like the Aero kit on the featured C class sedan. Unfortunately the site has not content from what I can tell. Does anyone know anything about this company and their products?

Do they make the front bumper replacement for the sport coupe?

To remove this ad, register today or login if you already are registered!

ggong5150 · 04-13-2003, 03:25 PM

Expression body kits are being sold by Performance Products, CA.
Go to www.performanceproducts.com for details. As far as I know it doesn't look like they make a kit for the coupe, only the sedan. I could be wrong as I was just looking through their catalog.
I'm going to get their rear dual exhaust valence for my car!
Good luck!

nukblazi · 04-13-2003, 04:36 PM

Thanks for the response. I have been searching the net for three damn days and couldn't find anything on this kit. I like because of the larger opening like the M3's. It sucks how little is out there for the coupe.

EDIT-- The product catalog ofcourse says that the kit isn't for the coupe...

b4chow · 04-13-2003, 06:53 PM

i heard the kit doesn't fit too well... i went to rbtech and the guys over there told me that the rear has to be molded, he said try to avoid them, but if you really want it, it can all be done...

ggong5150 · 04-14-2003, 12:41 AM

How do you mold the rear?
As it looks the rear valence replaces a piece of the bumper.
Should be a direct replacement.

Are you speaking of the entire rear bumper?

b4chow · 04-14-2003, 01:18 AM

not really sure, all i was told was that the add-on bumper doesn't fit too well. however, if you go to a good enough body shop it can be done. a lot of bodykits are like that especially replicas, but i was surprised to hear that the expression doesn't fit too well. if you want more info i would recommend calling rbtech. they're the ones that told me.

nukblazi · 04-15-2003, 02:53 AM

Quote:

Originally posted by b4chow
not really sure, all i was told was that the add-on bumper doesn't fit too well. however, if you go to a good enough body shop it can be done. a lot of bodykits are like that especially replicas, but i was surprised to hear that the expression doesn't fit too well. if you want more info i would recommend calling rbtech. they're the ones that told me.

Thanks for all the feedback. I spoke to Expression and they said that currently they are working on the new CLK then the Coupe is next. I only want the front bumper, I like the larger opening, looks more aggresive. I want the AMG rear bumper.

Do you have a site link or number for rbtech?

b4chow · 04-15-2003, 04:35 AM

http://www.rbtechla.com/

i think the guy's name is ralph. i've never gotten anything from them because they have pretty steep prices, but they do good work in general.

LorinserCClass · 04-15-2003, 07:11 PM

STF the forum on RBTech. I saw someone post an article from a body shop trade mag(or something along those lines)about their "quality service". Read it B4 U deal w/them.

04-13-2003, 04:36 PM	#3
nukblazi MBWorld Fanatic! Garage is empty, add now Join Date: Feb 2003 Location: Abingdon, MD Posts: 2,012	Thanks for the response. I have been searching the net for three damn days and couldn't find anything on this kit. I like because of the larger opening like the M3's. It sucks how little is out there for the coupe. EDIT-- The product catalog ofcourse says that the kit isn't for the coupe... Last edited by nukblazi; 04-13-2003 at 04:53 PM.

04-15-2003, 07:11 PM	#9
LorinserCClass MBWorld Fanatic! Garage is empty, add now Join Date: Nov 2002 Location: El Pueblo de la Reyna de los Angeles Posts: 4,605 Drives: The True OG Modded out W203	STF the forum on RBTech. I saw someone post an article from a body shop trade mag(or something along those lines)about their "quality service". Read it B4 U deal w/them. __________________ No REPLICAS No SPONSORS No BS ALL Gangsta Last Few Pix of My Baby Before She Was Handed Over To The New Owner... Now chillin in: '10 Audi A5 Ibis White on Black--MODDED! Oh snap we starting again! '06 RR Sport Chawton White on Alpaca <----R.I.P 6/1/7 :( '05 Audi A6 Midnight Blue on Ameretto <----EX wrecked :(

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

04-13-2003, 03:25 PM	#2
ggong5150 MBWorld Fanatic! Garage is empty, add now Join Date: Mar 2003 Location: Jinsoku Posts: 1,484 Drives: 03 C320, 1999 BMW 323 (sold), 1990 Nissan 300Z (sold)	Expression body kits are being sold by Performance Products, CA. Go to www.performanceproducts.com for details. As far as I know it doesn't look like they make a kit for the coupe, only the sedan. I could be wrong as I was just looking through their catalog. I'm going to get their rear dual exhaust valence for my car! Good luck!

04-13-2003, 06:53 PM	#4
b4chow Super Member Garage is empty, add now Join Date: Dec 2001 Location: Los Angeles Posts: 565	i heard the kit doesn't fit too well... i went to rbtech and the guys over there told me that the rear has to be molded, he said try to avoid them, but if you really want it, it can all be done...

04-14-2003, 12:41 AM	#5
ggong5150 MBWorld Fanatic! Garage is empty, add now Join Date: Mar 2003 Location: Jinsoku Posts: 1,484 Drives: 03 C320, 1999 BMW 323 (sold), 1990 Nissan 300Z (sold)	How do you mold the rear? As it looks the rear valence replaces a piece of the bumper. Should be a direct replacement. Are you speaking of the entire rear bumper?

04-14-2003, 01:18 AM	#6
b4chow Super Member Garage is empty, add now Join Date: Dec 2001 Location: Los Angeles Posts: 565	not really sure, all i was told was that the add-on bumper doesn't fit too well. however, if you go to a good enough body shop it can be done. a lot of bodykits are like that especially replicas, but i was surprised to hear that the expression doesn't fit too well. if you want more info i would recommend calling rbtech. they're the ones that told me.

04-15-2003, 04:35 AM	#8
b4chow Super Member Garage is empty, add now Join Date: Dec 2001 Location: Los Angeles Posts: 565	http://www.rbtechla.com/ i think the guy's name is ralph. i've never gotten anything from them because they have pretty steep prices, but they do good work in general.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)