2002 c230K Transmission cooling lines
#1
Newbie
Thread Starter
Join Date: Jan 2014
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
2002 Mercedes C230 Kompressor
2002 c230K Transmission cooling lines
I have been wrestling with trying to replace the upper cooling line o ring. I seem to be unable to undo the line clip below the fitting (fat hands), so I can slide the fitting back to replace the o ring. Any tricks to slipping the line out without damaging the clip or line?
#3
Newbie
Thread Starter
Join Date: Jan 2014
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
2002 Mercedes C230 Kompressor
#4
MBWorld Fanatic!
1st off make sure you unbolt the hood support/latch and made some room to work.
Next, there's a clamp and one bolt that hold the hoses together.
Once you have that done, you'll have a little room to work, so then
should be easy.
Never really had a problem here.
Next, there's a clamp and one bolt that hold the hoses together.
Once you have that done, you'll have a little room to work, so then
should be easy.
Never really had a problem here.