2010 C300 - How to reset service message
03-05-2011, 06:35 PM
#1
Newbie
Thread Starter
Join Date: Mar 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2010 C300 - How to reset service message
Hi,
Can someone tell me how to resent the ASSYST PLUS message regarding Service A?
I have tried the procedure for earlier model years, but apparently the system was changed in 2010 because the displays are different and earlier instructions don't work.
Thank you.
Can someone tell me how to resent the ASSYST PLUS message regarding Service A?
I have tried the procedure for earlier model years, but apparently the system was changed in 2010 because the displays are different and earlier instructions don't work.
Thank you.
03-06-2011, 01:25 AM
#3
MBWorld Fanatic!
I found that if I reset it before it was due all went well. When I waited until it was overdue I had to have it reset by the dealer.
03-07-2011, 12:50 AM
#4
MBWorld Fanatic!
Trending Topics
05-09-2019, 10:00 PM
#8
Try to use push the "START" button twice
Here is what I did this week for my C300 reset:
The procedure in the PDF file sometimes works but this week I tried it failed. Instead to do the step 1 listed in the PDF file (insert key and turn to position 1), I push the keyless start button twice without foot on the break. Then follow step 2 to the end.
05-11-2019, 09:40 AM
#9
Newbie
Join Date: May 2019
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
e
I dont
-----------------------------------------------------------
Here is what I did this week for my C300 reset:
The procedure in the PDF file sometimes works but this week I tried it failed. Instead to do the step 1 listed in the PDF file (insert key and turn to position 1), I push the keyless start button twice without foot on the break. Then follow step 2 to the end.
Here is what I did this week for my C300 reset:
The procedure in the PDF file sometimes works but this week I tried it failed. Instead to do the step 1 listed in the PDF file (insert key and turn to position 1), I push the keyless start button twice without foot on the break. Then follow step 2 to the end.
I dont have the keyless start button.
