Attention about w204 engineering menu(REMAINING CHANGES RESET)
07-27-2011, 11:10 AM
#1
Newbie
Thread Starter
Attention about w204 engineering menu(REMAINING CHANGES RESET)
Hi every one
WHEN YOU CHANGE THE MODE TO JAPAN THE COMBINATION TO THE COMAND MENU CHANGES FROM :HANGUP+1+# TO: (PICKUP BUTTON +1+#)
and then finally i found out how to reset the remaining changes on the comand once you have exceeded the limit when you go to the engineering menu you go to (HW SETTINGS THEN HU PARAMETERS THEN DVD/MARKET SETTINGS THEN GO ALL THE WAY DOWN AND HOLD THE COMMAND WHEEL TOWARDS THE BACK SEATS AND IT WILL GO TO THE SECOND PAGE THEN IF YOUR COMAND IS IN JAPAN MODE PRESS PICKUP BUTTON +*+# AND IF YOUR COMAND IS IN ECE OR US MODE HOLD HANGUP BUTTON+*+# FOR 8 SECONDS THEN THE REMAINING CHANGES WILL BE RESETED AND WILL GIVE YOU 5 MORE ATTEMPS)
I HOPE THIS HELPS
WHEN YOU CHANGE THE MODE TO JAPAN THE COMBINATION TO THE COMAND MENU CHANGES FROM :HANGUP+1+# TO: (PICKUP BUTTON +1+#)
and then finally i found out how to reset the remaining changes on the comand once you have exceeded the limit when you go to the engineering menu you go to (HW SETTINGS THEN HU PARAMETERS THEN DVD/MARKET SETTINGS THEN GO ALL THE WAY DOWN AND HOLD THE COMMAND WHEEL TOWARDS THE BACK SEATS AND IT WILL GO TO THE SECOND PAGE THEN IF YOUR COMAND IS IN JAPAN MODE PRESS PICKUP BUTTON +*+# AND IF YOUR COMAND IS IN ECE OR US MODE HOLD HANGUP BUTTON+*+# FOR 8 SECONDS THEN THE REMAINING CHANGES WILL BE RESETED AND WILL GIVE YOU 5 MORE ATTEMPS)
I HOPE THIS HELPS
The following 4 users liked this post by Sinakokabi:
Deivis Mejdani (04-07-2021),
nassr almazroui (11-26-2016),
Pinball (07-29-2017),
raid_jarrar (11-07-2019)
05-07-2014, 02:56 AM
#5
Newbie
Join Date: May 2014
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
w 204 2010
Hi every one
WHEN YOU CHANGE THE MODE TO JAPAN THE COMBINATION TO THE COMAND MENU CHANGES FROM :HANGUP+1+# TO: (PICKUP BUTTON +1+#)
and then finally i found out how to reset the remaining changes on the comand once you have exceeded the limit when you go to the engineering menu you go to (HW SETTINGS THEN HU PARAMETERS THEN DVD/MARKET SETTINGS THEN GO ALL THE WAY DOWN AND HOLD THE COMMAND WHEEL TOWARDS THE BACK SEATS AND IT WILL GO TO THE SECOND PAGE THEN IF YOUR COMAND IS IN JAPAN MODE PRESS PICKUP BUTTON +*+# AND IF YOUR COMAND IS IN ECE OR US MODE HOLD HANGUP BUTTON+*+# FOR 8 SECONDS THEN THE REMAINING CHANGES WILL BE RESETED AND WILL GIVE YOU 5 MORE ATTEMPS)
I HOPE THIS HELPS
WHEN YOU CHANGE THE MODE TO JAPAN THE COMBINATION TO THE COMAND MENU CHANGES FROM :HANGUP+1+# TO: (PICKUP BUTTON +1+#)
and then finally i found out how to reset the remaining changes on the comand once you have exceeded the limit when you go to the engineering menu you go to (HW SETTINGS THEN HU PARAMETERS THEN DVD/MARKET SETTINGS THEN GO ALL THE WAY DOWN AND HOLD THE COMMAND WHEEL TOWARDS THE BACK SEATS AND IT WILL GO TO THE SECOND PAGE THEN IF YOUR COMAND IS IN JAPAN MODE PRESS PICKUP BUTTON +*+# AND IF YOUR COMAND IS IN ECE OR US MODE HOLD HANGUP BUTTON+*+# FOR 8 SECONDS THEN THE REMAINING CHANGES WILL BE RESETED AND WILL GIVE YOU 5 MORE ATTEMPS)
I HOPE THIS HELPS
MY CAR DO NOT HAVE NAVIGATION AND I AM GET TO THE MODE HU THE I PRESS THE COMAND BUTTON IT WILL GIVE OPTION NEXT OR BACK I PESS NEXT I GET IN TO PAGE HAVING IFORMATION ABOUT THE VIRSION AND THAT SHOWING USA I AM TRYING TO HOLD THE RED BUTTON +*+# BUT NOTHING IS HAPPEN ALSO I CAN GO TO THE PAGE WITH THE RADIO OPTION FOR FM AM AND ANTENA I PRESS ON ANTTENA IT WILL GIVE OPTION TO SEARCH THE FREQUENCY I CAN GET THE STATIONS AND LISTEN TO THE BUT WHEN I TURN THE CAR OFF FOR ONE OUR I LOOSES THEM AGAIN ??? SO PLEASE ANY BODY CAN TELL HOW I DO SAVE THE SATATIONS??? THANKS
05-07-2014, 11:42 AM
#6
Senior Member
MY CAR DO NOT HAVE NAVIGATION AND I AM GET TO THE MODE HU THE I PRESS THE COMAND BUTTON IT WILL GIVE OPTION NEXT OR BACK I PESS NEXT I GET IN TO PAGE HAVING IFORMATION ABOUT THE VIRSION AND THAT SHOWING USA I AM TRYING TO HOLD THE RED BUTTON +*+# BUT NOTHING IS HAPPEN ALSO I CAN GO TO THE PAGE WITH THE RADIO OPTION FOR FM AM AND ANTENA I PRESS ON ANTTENA IT WILL GIVE OPTION TO SEARCH THE FREQUENCY I CAN GET THE STATIONS AND LISTEN TO THE BUT WHEN I TURN THE CAR OFF FOR ONE OUR I LOOSES THEM AGAIN ??? SO PLEASE ANY BODY CAN TELL HOW I DO SAVE THE SATATIONS??? THANKS
Okay first off. Look at your keyboard which should look like this.
Next make sure your CAPS LOCK button is off!!!!!!!!
Next step is to go here and read the manual.
http://www.mbusa.com/mercedes/servic...owners_manuals
The following users liked this post:
Christine_S (01-20-2023)
05-07-2014, 06:02 PM
#7
Senior Member
Join Date: Mar 2011
Location: Orange County
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
'10 C300
Okay first off. Look at your keyboard which should look like this.
Next make sure your CAPS LOCK button is off!!!!!!!!
Next step is to go here and read the manual.
http://www.mbusa.com/mercedes/servic...owners_manuals
Next make sure your CAPS LOCK button is off!!!!!!!!
Next step is to go here and read the manual.
http://www.mbusa.com/mercedes/servic...owners_manuals
LOL!!!!
Trending Topics
01-29-2016, 12:51 PM
#10
MBWorld Fanatic!
01-29-2016, 02:28 PM
#11
Okay first off. Look at your keyboard which should look like this.
Next make sure your CAPS LOCK button is off!!!!!!!!
Next step is to go here and read the manual.
http://www.mbusa.com/mercedes/servic...owners_manuals
Next make sure your CAPS LOCK button is off!!!!!!!!
Next step is to go here and read the manual.
http://www.mbusa.com/mercedes/servic...owners_manuals
Classic!!!
11-26-2016, 03:37 PM
#12
Nassr
Hi every one
WHEN YOU CHANGE THE MODE TO JAPAN THE COMBINATION TO THE COMAND MENU CHANGES FROM :HANGUP+1+# TO: (PICKUP BUTTON +1+#)
and then finally i found out how to reset the remaining changes on the comand once you have exceeded the limit when you go to the engineering menu you go to (HW SETTINGS THEN HU PARAMETERS THEN DVD/MARKET SETTINGS THEN GO ALL THE WAY DOWN AND HOLD THE COMMAND WHEEL TOWARDS THE BACK SEATS AND IT WILL GO TO THE SECOND PAGE THEN IF YOUR COMAND IS IN JAPAN MODE PRESS PICKUP BUTTON +*+# AND IF YOUR COMAND IS IN ECE OR US MODE HOLD HANGUP BUTTON+*+# FOR 8 SECONDS THEN THE REMAINING CHANGES WILL BE RESETED AND WILL GIVE YOU 5 MORE ATTEMPS)
I HOPE THIS HELPS
WHEN YOU CHANGE THE MODE TO JAPAN THE COMBINATION TO THE COMAND MENU CHANGES FROM :HANGUP+1+# TO: (PICKUP BUTTON +1+#)
and then finally i found out how to reset the remaining changes on the comand once you have exceeded the limit when you go to the engineering menu you go to (HW SETTINGS THEN HU PARAMETERS THEN DVD/MARKET SETTINGS THEN GO ALL THE WAY DOWN AND HOLD THE COMMAND WHEEL TOWARDS THE BACK SEATS AND IT WILL GO TO THE SECOND PAGE THEN IF YOUR COMAND IS IN JAPAN MODE PRESS PICKUP BUTTON +*+# AND IF YOUR COMAND IS IN ECE OR US MODE HOLD HANGUP BUTTON+*+# FOR 8 SECONDS THEN THE REMAINING CHANGES WILL BE RESETED AND WILL GIVE YOU 5 MORE ATTEMPS)
I HOPE THIS HELPS
Thanks alot i was take my car to the dealer they dont no what is engineering mode 😳
Thanks alot
08-20-2018, 04:30 AM
#16
Newbie
Join Date: Nov 2017
Location: Taipei Taiwan ROC
Posts: 6
Received 0 Likes
on
0 Posts
2008 W204 C250 Avantgarde S M272
11-10-2020, 12:29 AM
#19
Newbie
Join Date: Nov 2020
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
W212 2014 E300 Japan
03-29-2024, 12:57 AM
#20
Junior Member
Hi every one
WHEN YOU CHANGE THE MODE TO JAPAN THE COMBINATION TO THE COMAND MENU CHANGES FROM :HANGUP+1+# TO: (PICKUP BUTTON +1+#)
and then finally i found out how to reset the remaining changes on the comand once you have exceeded the limit when you go to the engineering menu you go to (HW SETTINGS THEN HU PARAMETERS THEN DVD/MARKET SETTINGS THEN GO ALL THE WAY DOWN AND HOLD THE COMMAND WHEEL TOWARDS THE BACK SEATS AND IT WILL GO TO THE SECOND PAGE THEN IF YOUR COMAND IS IN JAPAN MODE PRESS PICKUP BUTTON +*+# AND IF YOUR COMAND IS IN ECE OR US MODE HOLD HANGUP BUTTON+*+# FOR 8 SECONDS THEN THE REMAINING CHANGES WILL BE RESETED AND WILL GIVE YOU 5 MORE ATTEMPS)
I HOPE THIS HELPS
WHEN YOU CHANGE THE MODE TO JAPAN THE COMBINATION TO THE COMAND MENU CHANGES FROM :HANGUP+1+# TO: (PICKUP BUTTON +1+#)
and then finally i found out how to reset the remaining changes on the comand once you have exceeded the limit when you go to the engineering menu you go to (HW SETTINGS THEN HU PARAMETERS THEN DVD/MARKET SETTINGS THEN GO ALL THE WAY DOWN AND HOLD THE COMMAND WHEEL TOWARDS THE BACK SEATS AND IT WILL GO TO THE SECOND PAGE THEN IF YOUR COMAND IS IN JAPAN MODE PRESS PICKUP BUTTON +*+# AND IF YOUR COMAND IS IN ECE OR US MODE HOLD HANGUP BUTTON+*+# FOR 8 SECONDS THEN THE REMAINING CHANGES WILL BE RESETED AND WILL GIVE YOU 5 MORE ATTEMPS)
I HOPE THIS HELPS
