Smerc engineering Strut brace and cf rear spoiler

Karl09 · 04-26-2012, 02:54 PM

Just installed my Smerc Engineering engine strut tower brace and man am I impressed ! Thought it was going to do very little and just be a look thing, but after some tight cornering and invisible police chases with myself, man am I impressed. If you havnt had the chance to check this out, I would deffinately advice it ! One of the best purchases yet besides my x-pipe ! Customer service was awesome and responded within' a very small time when I had a simple question! Yes I know it's dirty, it was raining while I was installing it and seeing that it never rains in Las Vegas, I wanted to enjoy it.

Next up is my CF rear spoiler! Shout out goes to -The Dark Side- and Smerc Engineering for helping me with the purchase/install!

To remove this ad, register today or login if you already are registered!

agedog2gt · 04-26-2012, 02:57 PM

Looks good bro. Funny our cars look "alomost identicle"! I just put my rims on and ordered a CF trunk spoiler. Do you have anymore pics you can post up for us ? Would appreciate it

Karl09 · 04-26-2012, 03:20 PM

Yeah man I have a build thread somewhere around here! I'll post em up though no problem! Next up is quad diffuser and tips once TheDarkSide decides to trade up ! Do you have your x pipe done?

The bottom two are older pics

AkaSigFreak · 04-26-2012, 03:35 PM

Where did you get the CF Spoiler?

Karl09 · 04-26-2012, 03:41 PM

A member here on the forums, he has another if you were interested, I can see how much he'd want? 702-592-7353
Or kworkman09@yahoo.com
Shoot me a text or an email!

agedog2gt · 04-26-2012, 04:20 PM

Thanks bro. I really like your front grille. I have not done the xpipe mod just yet. I have plans on doing that in a few months with the quad exhaust. Before all that i plan on lowering my car with some coilovers (if i can wait) if not ill grab a set of springs. Next month i plan on ordering my c63 amg big brake kit. are you lowered at all?

agedog2gt · 04-26-2012, 04:21 PM

what did you use to paint your grille and orange bumper lights?

Karl09 · 04-26-2012, 04:22 PM

Nope not lowered at all! I recommend x-pipe first ! Only costs around 120$ and makes a world I mean world! Of change

Karl09 · 04-26-2012, 04:23 PM

It's called Plasti-dip. Takes no sanding, no prep work... And when I get tired of it I can peel it off. Coolest stuff known to man! I'll be doing a DIY in about an hour or sO

steven1888 · 04-26-2012, 05:24 PM

It's you again haha ... Jk .. nice. I like where you going with the car .. mod wise.
How much did that strut bar cost you when did you order it? I had it on my old G. It makes a big different when cornering turns.

Karl09 · 04-26-2012, 05:25 PM

279$ off Smerc engineering and worth every penny! Got it hmmmm I'm gonna say a week ago or so? Been to busy to install it !

steven1888 · 04-26-2012, 05:31 PM

Oh if my fund wasn't so tight. Really want to do the quad exhast first before anything haha ..

Karl09 · 04-26-2012, 05:39 PM

That's my next step! I think it makes the car look 10x better.

chewychiu · 04-26-2012, 11:05 PM

to quad exhaust and x-pipe

pnoyworx · 04-27-2012, 02:11 AM

i'll be getting that strut bar soon. Working on my sway bars first.

04-26-2012, 03:35 PM	#4
AkaSigFreak MBWorld Fanatic! 2008 Mercedes-Benz C-Class Join Date: Dec 2007 Location: Orlando, Florida Posts: 2,378 Drives: 2013 C250 Coupe w/Sports PLUS//Urban Assault Vehicle (UAV)	Where did you get the CF Spoiler? __________________

04-27-2012, 02:11 AM	#15
pnoyworx Senior Member 2008 Mercedes-Benz C-Class Join Date: Jan 2012 Location: Washington Posts: 420 Drives: 08 C300, 07 E63, 07 Nismo 350z	i'll be getting that strut bar soon. Working on my sway bars first. __________________ w211-E63 Gary Godhand Style lip, Diamond LED's, TRS D1s 6000k, InCurve 20x9-10.5 w/ Nitto Invo 255/30-295/25, Winter Conti DWS, EBC Reds. Star Lowered W204 C300 EuroTeck CF Front Lip ~ EuroTeck CF Rear Diffuser Brabus Style 3pc Rear Spoiler ~ Roof Spoiler ~ Euro 63RS 19"s ~ Falken 452 235/35F 265/30R ~ H&R Coilovers ~ Eibach Anti Roll Bar ~ MB Arts Top Strut Brace ~ Fender Rolled ~ 20% Tint All Around ~ K&N AirFilter ~ 8000k HID's ~ LED Brows and License Plate ~ 2010 Style Side Mirror Caps

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

04-26-2012, 02:57 PM	#2
agedog2gt Senior Member Garage is empty, add now Join Date: Dec 2011 Posts: 387 Drives: 2008 Mercedes C300	Looks good bro. Funny our cars look "alomost identicle"! I just put my rims on and ordered a CF trunk spoiler. Do you have anymore pics you can post up for us ? Would appreciate it

04-26-2012, 03:20 PM	#3
Karl09 Member 2010 Mercedes-Benz 300-Class Join Date: Feb 2012 Posts: 85 Drives: 2010 c300	Yeah man I have a build thread somewhere around here! I'll post em up though no problem! Next up is quad diffuser and tips once TheDarkSide decides to trade up ! Do you have your x pipe done? The bottom two are older pics

04-26-2012, 03:41 PM	#5
Karl09 Member 2010 Mercedes-Benz 300-Class Join Date: Feb 2012 Posts: 85 Drives: 2010 c300	A member here on the forums, he has another if you were interested, I can see how much he'd want? 702-592-7353 Or kworkman09@yahoo.com Shoot me a text or an email!

04-26-2012, 04:20 PM	#6
agedog2gt Senior Member Garage is empty, add now Join Date: Dec 2011 Posts: 387 Drives: 2008 Mercedes C300	Thanks bro. I really like your front grille. I have not done the xpipe mod just yet. I have plans on doing that in a few months with the quad exhaust. Before all that i plan on lowering my car with some coilovers (if i can wait) if not ill grab a set of springs. Next month i plan on ordering my c63 amg big brake kit. are you lowered at all?

04-26-2012, 04:21 PM	#7
agedog2gt Senior Member Garage is empty, add now Join Date: Dec 2011 Posts: 387 Drives: 2008 Mercedes C300	what did you use to paint your grille and orange bumper lights?

04-26-2012, 04:22 PM	#8
Karl09 Member 2010 Mercedes-Benz 300-Class Join Date: Feb 2012 Posts: 85 Drives: 2010 c300	Nope not lowered at all! I recommend x-pipe first ! Only costs around 120$ and makes a world I mean world! Of change

04-26-2012, 04:23 PM	#9
Karl09 Member 2010 Mercedes-Benz 300-Class Join Date: Feb 2012 Posts: 85 Drives: 2010 c300	It's called Plasti-dip. Takes no sanding, no prep work... And when I get tired of it I can peel it off. Coolest stuff known to man! I'll be doing a DIY in about an hour or sO

04-26-2012, 05:24 PM	#10
steven1888 Senior Member Garage is empty, add now Join Date: Sep 2011 Posts: 251 Drives: 2008 c350 sport	It's you again haha ... Jk .. nice. I like where you going with the car .. mod wise. How much did that strut bar cost you when did you order it? I had it on my old G. It makes a big different when cornering turns.

04-26-2012, 05:25 PM	#11
Karl09 Member 2010 Mercedes-Benz 300-Class Join Date: Feb 2012 Posts: 85 Drives: 2010 c300	279$ off Smerc engineering and worth every penny! Got it hmmmm I'm gonna say a week ago or so? Been to busy to install it !

04-26-2012, 05:31 PM	#12
steven1888 Senior Member Garage is empty, add now Join Date: Sep 2011 Posts: 251 Drives: 2008 c350 sport	Oh if my fund wasn't so tight. Really want to do the quad exhast first before anything haha ..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

04-26-2012, 05:39 PM	#13
Karl09 Member 2010 Mercedes-Benz 300-Class Join Date: Feb 2012 Posts: 85 Drives: 2010 c300	That's my next step! I think it makes the car look 10x better.

04-26-2012, 11:05 PM	#14
chewychiu Senior Member 2010 Mercedes-Benz C-Class Join Date: Dec 2011 Location: Long Island, NY Posts: 289 Drives: 2010 C350	to quad exhaust and x-pipe