C200/250CGI tune
#26
I agree, the main benefit to changing a down pipe is less restriction in airflow, with catless being the least restrictive and has the most potential for performance improvements. I would get the Rado down pipe or any other catless one, keep my factory catted down pipe and just swap them whenever I need service/emissions IF its not that hard of a swap.
If it is too much of a pain in the *** to swap, then thats another story...
If it is too much of a pain in the *** to swap, then thats another story...
#27
Hello guys, new to the forum here. I myself have installed Rado's downpipe and intercooler combo, pretty happy with the results. I'm now thinking of the various tuning options, what do you guys think of the unichip piggyback compared to the options offered by the other various companies? The unichip can be customized and tuned on a dyno from what i understand.
#28
Member
Thread Starter
Join Date: Jul 2014
Location: Canberra, Australia
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
W204 MY10 C200CGI
Hello guys, new to the forum here. I myself have installed Rado's downpipe and intercooler combo, pretty happy with the results. I'm now thinking of the various tuning options, what do you guys think of the unichip piggyback compared to the options offered by the other various companies? The unichip can be customized and tuned on a dyno from what i understand.
#29
Member
Thread Starter
Join Date: Jul 2014
Location: Canberra, Australia
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
W204 MY10 C200CGI
I am thinking of going the Armytrix catless downpipe actually. I just hate having to pull my car apart to get it registered - regardless of ease.
Of course, there is always the potential to jam the shell of a cat around a catless pipe
Of course, there is always the potential to jam the shell of a cat around a catless pipe
#30
Thanks for your reply AusMB. I have actually searched the forums but couldn't get much information regarding the Unichip. The thing that interests me is that the Unichip is fully mappable and in theory should give you more options than what is provided by the other reputable manufacturers.
For example, you have an economy map, a 95 and a 98 octane performance map and the ability to engage these maps up at anytime. The only thing is you will need to find a tuner to tune the darn thing.
For example, you have an economy map, a 95 and a 98 octane performance map and the ability to engage these maps up at anytime. The only thing is you will need to find a tuner to tune the darn thing.
#31
Member
Thread Starter
Join Date: Jul 2014
Location: Canberra, Australia
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
W204 MY10 C200CGI
Valid point I guess. Although, given its been a few years now and all the big tuners (vath, kleemann, brabus, carlsson) have yet to produce much more than a piggyback and some higher airflow, it seems likely that there isn't much to be had. Not to mention that they are all producing relatively similar results.
If you can find someone who can tune the unichip and actually produce more power than the others, go for it. Beware of what that may mean for engine life though :-)
If you can find someone who can tune the unichip and actually produce more power than the others, go for it. Beware of what that may mean for engine life though :-)
#32
I don't think it is possible to squeeze more power out of this engine anymore than it has already been done. I'm just wondering if it can be used to take advantage of the bolt ons and future bolt ons that may become available. Anyway, how much did you pay for your C-Tronic?
#33
Member
Thread Starter
Join Date: Jul 2014
Location: Canberra, Australia
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
W204 MY10 C200CGI
I don't think it is possible to squeeze more power out of this engine anymore than it has already been done. I'm just wondering if it can be used to take advantage of the bolt ons and future bolt ons that may become available. Anyway, how much did you pay for your C-Tronic?
#36
Member
Thread Starter
Join Date: Jul 2014
Location: Canberra, Australia
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
W204 MY10 C200CGI
I think the c-tronic alone is about $1800. It is pretty steep, but I think more rnd has gone into it then the cheaper ones. And it is far more protective of the vehicle
#41
Member
Found another tuning company based in England here is the link:
61 HP increase is pretty impressive from a tuning box only
http://www.racechip.com/chiptuning/m...50kw/index.php
There is a really good tuning company from Singapore:
http://www.dmsautomotive.com/index.php
61 HP increase is pretty impressive from a tuning box only
http://www.racechip.com/chiptuning/m...50kw/index.php
There is a really good tuning company from Singapore:
http://www.dmsautomotive.com/index.php
Last edited by EvolutionDrock; 09-02-2014 at 02:18 AM.
#43
Member
Few web sites state its 9:3:1. I would think that 10:3:1 wold be a really high number for a boosted car. Im still looking around for a tuner.
AS they state in the disclosure that maximizing the tune and playing with the dials might cause malfunction of certain components of the engine
AS they state in the disclosure that maximizing the tune and playing with the dials might cause malfunction of certain components of the engine
#44
Member
#45
MBWorld Fanatic!
Join Date: Mar 2006
Location: Hong Kong
Posts: 1,375
Likes: 0
Received 16 Likes
on
15 Posts
2010 C200 CGI
Few web sites state its 9:3:1. I would think that 10:3:1 wold be a really high number for a boosted car. Im still looking around for a tuner.
AS they state in the disclosure that maximizing the tune and playing with the dials might cause malfunction of certain components of the engine
AS they state in the disclosure that maximizing the tune and playing with the dials might cause malfunction of certain components of the engine
#48
Member
In my opinion the compression ratio is perfect. It allows us to go with bigger turbo, but nothing huge such as turbo from the semi. More compression, will give snappier response and better low end.
The only reason for lower compression is to go with really high boost, but you'll have too much lag for everyday drivability. The only positives about lower compression is:
1. you can run higher boost levels -- but our motors suffer from serious lag.
2. if you timing chain breaks, chances that the pistons will come in contact with valves are very doubtful.
The only reason for lower compression is to go with really high boost, but you'll have too much lag for everyday drivability. The only positives about lower compression is:
1. you can run higher boost levels -- but our motors suffer from serious lag.
2. if you timing chain breaks, chances that the pistons will come in contact with valves are very doubtful.
#49
Member
Thread Starter
Join Date: Jul 2014
Location: Canberra, Australia
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
W204 MY10 C200CGI
In my opinion the compression ratio is perfect. It allows us to go with bigger turbo, but nothing huge such as turbo from the semi. More compression, will give snappier response and better low end.
The only reason for lower compression is to go with really high boost, but you'll have too much lag for everyday drivability. The only positives about lower compression is:
1. you can run higher boost levels -- but our motors suffer from serious lag.
2. if you timing chain breaks, chances that the pistons will come in contact with valves are very doubtful.
The only reason for lower compression is to go with really high boost, but you'll have too much lag for everyday drivability. The only positives about lower compression is:
1. you can run higher boost levels -- but our motors suffer from serious lag.
2. if you timing chain breaks, chances that the pistons will come in contact with valves are very doubtful.
As for point no 2, don't confuse low compression with a non-interference engine configuration.
#50
Member
It all depends on how big you want to go. Looking at the stock location of the turbo, you could easily upgrade to k04 turbo and replace the internals, maybe even port and polish. It will involve some modification and custom work. Sky is the limit if you have adequate money to spend on it.