Rebuild m104 Engine harness
#1
Member
Thread Starter
Join Date: May 2015
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
mercedes c220 c36
Need help with identifying cable in m104 engine harness
I need help to identifying a cable that are connected to e main connector for the engine harness
it's a coxial cable and i have tried to take a picture where its goin. But i haven't been able to find the end postition of it
i have taken a picture from where it's start and where it's goin down down the bulkhead behind the oilfilter and somewhere down to the transmission but i can't find where it's goin.
it's a coxial cable and i have tried to take a picture where its goin. But i haven't been able to find the end postition of it
i have taken a picture from where it's start and where it's goin down down the bulkhead behind the oilfilter and somewhere down to the transmission but i can't find where it's goin.
Last edited by zibpka; 07-13-2016 at 12:11 PM.
#2
crankshaft position sensor
I need help to identifying a cable that are connected to e main connector for the engine harness
it's a coxial cable and i have tried to take a picture where its goin. But i haven't been able to find the end postition of it
i have taken a picture from where it's start and where it's goin down down the bulkhead behind the oilfilter and somewhere down to the transmission but i can't find where it's goin.
it's a coxial cable and i have tried to take a picture where its goin. But i haven't been able to find the end postition of it
i have taken a picture from where it's start and where it's goin down down the bulkhead behind the oilfilter and somewhere down to the transmission but i can't find where it's goin.
CPS IS THE WIRES HOME