TiKORE Titanium Lug Bolts for Mercedes (Made in the USA)
#26
Former Vendor of MBWorld
Thread Starter
Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
IS-F, STI, and GMC Trucks
At this time we do not offer a locking solution. At some point in the future we will, at an additional cost. We do not many of the options out there, as of right now, if someone wants your wheels they ar going to get them. We hope to offer a real solution.
Joshua
Joshua
#28
Former Vendor of MBWorld
Thread Starter
Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
IS-F, STI, and GMC Trucks
Question for everyone. If you could have any color on these bolts, what would you prefer? Or would you keep the titanium machined finish?
TiKORE
TiKORE
#30
Senior Member
Join Date: Jul 2009
Location: Richmond BC Canada
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
C63 AMG
450? for some titanium lugs...... I paid 150 for Project Kic R40s for those of you who don't noe what that is, its the one of the most expensive titanium JDM lugs money can buy....
#32
Senior Member
Join Date: Jul 2009
Location: Richmond BC Canada
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
C63 AMG
#33
Super Member
#34
Former Vendor of MBWorld
Thread Starter
Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
IS-F, STI, and GMC Trucks
Sorry but you paid $150 for something that was not titanium, nor is that possible. Please try to confirm you facts before posting. These lug bolts are not for everyone. They are for people that want the best, at a great price.
#35
Former Vendor of MBWorld
Thread Starter
Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
IS-F, STI, and GMC Trucks
Yes we could get that set made for you. If you don't want the shine from the machined titanium, we would glass bead blast them, giving them a similar look to our corvette lug nuts on our website. Please let me know. Thanks
#36
PREMIER SPONSOR
Join Date: Nov 2001
Location: Huntington Beach, CA
Posts: 2,922
Likes: 0
Received 0 Likes
on
0 Posts
None fast enough!
This is VERY good pricing. We have sold other brands for as much as $1800/set based on our pricing from Italy.
These look to be great value. Yes, they are not for everyone though!
Thanks
Brad
These look to be great value. Yes, they are not for everyone though!
Thanks
Brad
#37
Former Vendor of MBWorld
Thread Starter
Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
IS-F, STI, and GMC Trucks
There has to be some further interest on these out there. Any more questions? Check out our website soon for new pictures, should have them up in a day!
Joshua
#38
Former Vendor of MBWorld
Thread Starter
Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
IS-F, STI, and GMC Trucks
Brand New TiKORE Titanium Lug Bolts for Mercedes (set of 20). These bolts are made in the USA (not china like our competitors) and made from 100% aerospace certified material. The listed price is way below our competitors. All of our threads are rolled not cut.
New low price of $450 + $15 for shipping!
Please verify measurements and seat type of your bolt before purchase.
Measurements: M14 x 1.5, conical seat, 27MM thread length.
Measurements: M12 x 1.5, conical seat, 27MM thread length.
We will accommodate custom lengths due to spacers, please inquiry to provide details of your needs.
FYI - We are a new sponsor on MBWorld!! We are very excited.
Grade 5 6AL-4V Titanium (Tikore's preferred material):
Yield Strength: 128,000psi
Ultimate Tensile Strength: 138,000psi
Shear Strength: 79,800psi
Density: .160 lb/in^3
Additional note: Grade 5 Titanium will not rust.
As presented above, titanium bolts/nuts have a strength that is very comparable to grade 8 steel bolts/nuts that are used in high strength applications. Furthermore, based on the density figure above grade 5 titanium is 45% lighter than steel components.
Please feel free to contact me with any questions or visit our site www.TiKORE.com. Thanks!
New low price of $450 + $15 for shipping!
Please verify measurements and seat type of your bolt before purchase.
Measurements: M14 x 1.5, conical seat, 27MM thread length.
Measurements: M12 x 1.5, conical seat, 27MM thread length.
We will accommodate custom lengths due to spacers, please inquiry to provide details of your needs.
FYI - We are a new sponsor on MBWorld!! We are very excited.
Grade 5 6AL-4V Titanium (Tikore's preferred material):
Yield Strength: 128,000psi
Ultimate Tensile Strength: 138,000psi
Shear Strength: 79,800psi
Density: .160 lb/in^3
Additional note: Grade 5 Titanium will not rust.
As presented above, titanium bolts/nuts have a strength that is very comparable to grade 8 steel bolts/nuts that are used in high strength applications. Furthermore, based on the density figure above grade 5 titanium is 45% lighter than steel components.
Please feel free to contact me with any questions or visit our site www.TiKORE.com. Thanks!
[IMG]file:///C:/Users/Joshua/Pictures/TiKORE/Bolt_Pics/DSC_0098.JPG[/IMG]
#40
Out Of Control!
Wanted to follow up on this. Do you think it'll be sometime in the next few months or this year maybe for this locking solution?
Thanks
#42
Former Vendor of MBWorld
Thread Starter
Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
IS-F, STI, and GMC Trucks
I honestly am not sure, but I would towards the end of this year. Right now demand is strong and like I mentioned current locking bolts don't really make me feel to safe still. We want to come up with something better. With that being said it will be a while. Thanks, Josh
#43
Former Vendor of MBWorld
Thread Starter
Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
IS-F, STI, and GMC Trucks
The Black Titanium Lug Bolts are in. A set will be $565 for a set of 20. And non black sets are now $500. Please let us know your thoughts... these are beautiful.
Last edited by TiKORE; 02-01-2011 at 11:35 PM.
#45
Former Vendor of MBWorld
Thread Starter
Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
IS-F, STI, and GMC Trucks
We can also do most other colors needed. Please let us know if you need a custom set with custom color. We can machine to your specs.
Also, for the people out there that are unaware. The cost of just the titanium alone is approx. $200, then you have tooling, precision machines, costs to run a business etc. If you want titanium, at a high quality, this price is more than great.
Thanks to everyone that has provided great questions and comments. To the others..... yup.
Also, for the people out there that are unaware. The cost of just the titanium alone is approx. $200, then you have tooling, precision machines, costs to run a business etc. If you want titanium, at a high quality, this price is more than great.
Thanks to everyone that has provided great questions and comments. To the others..... yup.
#47
MBWorld Fanatic!
#50
MBWorld Fanatic!
Are you suppose to not use impact tools as well on these? If you have the money, buy them, if not, don't ***** about them. At least a company is offering stuff for our cars!