19" HRE M40 :PICS:
#1
MBWorld Fanatic!
Thread Starter
19" HRE M40 :PICS:
I received my HRE M40's today from Showroom Motorsports. Thought I would share some pics with you guys. I will take some more pics once I buy the tires and have them mounted on the car.
Special thanks to Kirill and Brain @ Showroom Motorsports for providing me with outstanding service and this great set of wheels.
Here are the pics...Enjoy.
Special thanks to Kirill and Brain @ Showroom Motorsports for providing me with outstanding service and this great set of wheels.
Here are the pics...Enjoy.
Last edited by _AMG_; 02-09-2011 at 11:29 PM.
#3
MBWorld Fanatic!
Thread Starter
#4
MBWorld Fanatic!
The rims look like they are bending outward... is it your camera's lens? If they are concave in, then they will look awesome!!
#6
MBWorld Fanatic!
Thread Starter
I was thinking either the stock lugs or the black lugs from RPM.
I will either be running Michelin PS2 or Hankook tires. 235/35/19 front & 265/30/19 rear or 245front, 275 rear. Haven't decided yet.
Last edited by _AMG_; 02-10-2011 at 12:01 AM.
Trending Topics
#10
MBWorld Fanatic!
Thread Starter
Hey guys I just had a few questions....
1.) Will the stock lugs work with these wheels or do I need different length lugs?
2.) I am thinking of lowering the car later on with H&R springs, Will a 245 front & 275 rear tire be suitable for this or should I go with 235 front & 265 rear?
I am going with Hankook tires so they don't run very wide like the Michellin or Continental tires. Im guessing the 245-275 Hankook combo will be ok but im not 100% sure. Any feedback would be greatly appreciated.
1.) Will the stock lugs work with these wheels or do I need different length lugs?
2.) I am thinking of lowering the car later on with H&R springs, Will a 245 front & 275 rear tire be suitable for this or should I go with 235 front & 265 rear?
I am going with Hankook tires so they don't run very wide like the Michellin or Continental tires. Im guessing the 245-275 Hankook combo will be ok but im not 100% sure. Any feedback would be greatly appreciated.
#12
MBWorld Fanatic!
I'll be running 245/35's with a +35 offset in the spring. my car is lowered on H&R's I've only mocked them up as we still have over 2 feet of snow on the ground but I looks like it should be fine. My 19x10 +50 rear with 275/30 even looks fine. Well maybe afer some fender rolling.
#20
MBWorld Fanatic!
Thread Starter
I'll be running 245/35's with a +35 offset in the spring. my car is lowered on H&R's I've only mocked them up as we still have over 2 feet of snow on the ground but I looks like it should be fine. My 19x10 +50 rear with 275/30 even looks fine. Well maybe afer some fender rolling.
Thanks Yazid!! As soon as I get the tires im gonna mount them ASAP. lol
Thank you.
Thank you
I have always like the Monoblocks. I have seen the similar style P40 wheels on the M3 and they look really good. I will post up pics as soon as I have them mounted.
Last edited by _AMG_; 02-10-2011 at 02:34 PM.
#21
Administrator
Join Date: Nov 2001
Location: THE Orange County, California
Posts: 11,921
Received 795 Likes
on
495 Posts
2020 Audi R8 V10, 2016 AMG GTS, 2018 E63S Edition 1, 2018 Porsche GTS Cab, 2012 C63 BS
First off, great looking wheel- owned two sets concurrently and still have the P40's on the 997TT
Check your weights on those wheels--- but I know for a fact that the benz molds are more heavy duty than those of the Porsche and BMW's and thus have more weight.
I have had two sets of P40's, one for the 997TT and one for the now sold E92 M3- I was considering M40's too but they were heavier. I think you might be ok since you are running 19's.
FYI my 19x8.5 P40's weigh 21lbs and the 19x11 weigh 24 lbs--- 997TT
The 20x9 and 20x10.5 E92 P40's weight slightly over 25lbs each.
Check your weights on those wheels--- but I know for a fact that the benz molds are more heavy duty than those of the Porsche and BMW's and thus have more weight.
I have had two sets of P40's, one for the 997TT and one for the now sold E92 M3- I was considering M40's too but they were heavier. I think you might be ok since you are running 19's.
FYI my 19x8.5 P40's weigh 21lbs and the 19x11 weigh 24 lbs--- 997TT
The 20x9 and 20x10.5 E92 P40's weight slightly over 25lbs each.
#22
MBWorld Fanatic!
Thread Starter
First off, great looking wheel- owned two sets concurrently and still have the P40's on the 997TT
Check your weights on those wheels--- but I know for a fact that the benz molds are more heavy duty than those of the Porsche and BMW's and thus have more weight.
I have had two sets of P40's, one for the 997TT and one for the now sold E92 M3- I was considering M40's too but they were heavier. I think you might be ok since you are running 19's.
FYI my 19x8.5 P40's weigh 21lbs and the 19x11 weigh 24 lbs--- 997TT
The 20x9 and 20x10.5 E92 P40's weight slightly over 25lbs each.
Check your weights on those wheels--- but I know for a fact that the benz molds are more heavy duty than those of the Porsche and BMW's and thus have more weight.
I have had two sets of P40's, one for the 997TT and one for the now sold E92 M3- I was considering M40's too but they were heavier. I think you might be ok since you are running 19's.
FYI my 19x8.5 P40's weigh 21lbs and the 19x11 weigh 24 lbs--- 997TT
The 20x9 and 20x10.5 E92 P40's weight slightly over 25lbs each.
Vic now we definitely gotta do that shoot!! lol
#25
Administrator
Join Date: Nov 2001
Location: THE Orange County, California
Posts: 11,921
Received 795 Likes
on
495 Posts
2020 Audi R8 V10, 2016 AMG GTS, 2018 E63S Edition 1, 2018 Porsche GTS Cab, 2012 C63 BS
This building is in Irvine near the Spectrum, always good for shots
Or this one also by the Spectrum:
Or this one also by the Spectrum: