C63 AMG (W204) 2008 - 2015

DRAG RACING PARTS AVAILABLE NOW!!!!

Old 02-16-2011, 12:13 PM
  #1  
Former Vendor of MBWorld
Thread Starter
 
Staff@RPM's Avatar
 
Join Date: Feb 2005
Location: Long Island, NY
Posts: 1,209
Likes: 0
Received 0 Likes on 0 Posts
DRAG RACING PARTS AVAILABLE NOW!!!!

Drag racing season is upon us so I figured it would be a good time to start putting together a parts list of things to help you go faster that we are carrying. We will try to keep the pricing extremely low on these parts and, if you guys have any other suggestions, I will add more drag racing parts to our inventory as needed.

Quaife LSD-
-$950.00

Braille 15 lbs. battery- Over 1000 cold cranking amps (very little reserve capacity)
-$159.60

Braille 21 lbs. battery- Almost 1400 cranking amps (still low reserve capacity but 50% more than the 15lbs. battery)
-$178.60

We also carry different style mounts and battery charges, please feel free to ask me about any Braille products.

Lightweight drag racing seat- I am working on this mod now. I just made up a jig for the W204 floor so that I can make seat bases for the seats. You will get the seat and all you will have to do is remove the factory seat and bolt in the lightweight seat. It will save you a lot of time, trouble, money and aggravation by ordering it as a kit. This mod will save about 50lbs. If you do the seat and the battery you should drop around 1/10 and if you remove the passenger seat and the rear seat you should drop another 1/10. It would be nice to go from 11.1 to 10.90 for $700.00 total.
-estimated price $450.00-$550.00

Thank you Mike (Dodger63) for taking the time and money to do these mods and prove how well they work. Thanks to your investment I can put kits together and sell them to other MBWorld members. It's Mikes dedication to going faster that is helping make it easier for us to help others to follow in his path. If you are interested in any of these mods please feel free to get in touch with me. I will add more parts as we test them and see how well they work.
Old 02-16-2011, 12:25 PM
  #2  
Banned
 
Badblackfolife's Avatar
 
Join Date: Jan 2011
Location: None of your business
Posts: 311
Likes: 0
Received 0 Likes on 0 Posts
BENZ 550
which battery would work for my clk550 in the summer time?
Old 02-16-2011, 12:38 PM
  #3  
Former Vendor of MBWorld
Thread Starter
 
Staff@RPM's Avatar
 
Join Date: Feb 2005
Location: Long Island, NY
Posts: 1,209
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Badblackfolife
which battery would work for my clk550 in the summer time?
The top seller that we have is the 15lbs. battery just because that is the lightest one that still has enough cold cranking amps to reliably start your Mercedes Benz.
Old 02-16-2011, 12:39 PM
  #4  
Banned
 
Badblackfolife's Avatar
 
Join Date: Jan 2011
Location: None of your business
Posts: 311
Likes: 0
Received 0 Likes on 0 Posts
BENZ 550
Originally Posted by Staff@RPM
The top seller that we have is the 15lbs. battery just because that is the lightest one that still has enough cold cranking amps to reliably start your Mercedes Benz.
do you carry the installation frame? if so how much?

thank you.
Old 02-16-2011, 12:44 PM
  #5  
MBWorld Fanatic!
 
GHAZAN's Avatar
 
Join Date: May 2009
Location: Norte America
Posts: 1,463
Received 1 Like on 1 Post
MBUSA
Will you just be selling the seat bases for other aftermarket seats?
Old 02-16-2011, 12:47 PM
  #6  
Out Of Control!!
 
dynomite05's Avatar
 
Join Date: Apr 2008
Location: Jerzy
Posts: 10,275
Likes: 0
Received 9 Likes on 9 Posts
04 CLK 320 > CLK32K
Any plans on seats for the W209?
Old 02-16-2011, 01:00 PM
  #7  
MBWorld Fanatic!
 
dodger63's Avatar
 
Join Date: Oct 2008
Location: Northport N.Y.
Posts: 3,317
Received 3 Likes on 2 Posts
2013 f250 6.7 diesel
I think the bolt pattern is the same measure the holes front to back were the seat bolts to the floor
Old 02-16-2011, 01:06 PM
  #8  
Super Moderator Alumni
 
superlubricity's Avatar
 
Join Date: Dec 2009
Location: USA
Posts: 2,189
Likes: 0
Received 6 Likes on 4 Posts
2011 GLK 350, 2013 GT-R, & 2013 RAM 1500
dodger, are you rocking a Race Seat now?

Were you when you went 10.87?
Old 02-16-2011, 01:07 PM
  #9  
Former Vendor of MBWorld
Thread Starter
 
Staff@RPM's Avatar
 
Join Date: Feb 2005
Location: Long Island, NY
Posts: 1,209
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Badblackfolife
do you carry the installation frame? if so how much?

thank you.
Here is a link to the Braille website. I linked it to the page with a mount that we stock for the 15'bs. battery. If you look to the left you will see other mounts that I can order for you as well.

http://www.braillebattery.com/index....num_mount_kit/

Originally Posted by GHAZAN
Will you just be selling the seat bases for other aftermarket seats?
What aftermarket seat are you thinking about. I will try and get you anything that you may need.

Originally Posted by dynomite05
Any plans on seats for the W209?
I only have the C63 right now but, as dodger said, it may be the same. If you wanted to take a couple of measurements I can let you know. I would need the measurement from the rear hole to the front hole and from the left hole to the right hole. Hopefully we can make something work.
Old 02-16-2011, 01:36 PM
  #10  
Member
 
no loser's Avatar
 
Join Date: Jan 2010
Location: UAE-AD
Posts: 215
Likes: 0
Received 0 Likes on 0 Posts
c63
How about the LSD Q it is in stock or what

really I am thinking to buy one from you
Old 02-16-2011, 01:41 PM
  #11  
MBWorld Fanatic!
 
SonnyakaPig's Avatar
 
Join Date: Aug 2010
Posts: 2,494
Likes: 0
Received 3 Likes on 3 Posts
MB
Very cool thread, RPM. It's great to see your company helping our platform advance at the track.

I like the idea of running a lightweight seat. Perhaps down the line I may think about that.
Old 02-16-2011, 01:47 PM
  #12  
Former Vendor of MBWorld
Thread Starter
 
Staff@RPM's Avatar
 
Join Date: Feb 2005
Location: Long Island, NY
Posts: 1,209
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by no loser
How about the LSD Q it is in stock or what

really I am thinking to buy one from you
I am not 100% sure what you are asking, I think you are asking about a Quaife. If that is what you are asking and you are looking for one for a C63 we are selling them for $950.00.

Originally Posted by SonnyakaPig
Very cool thread, RPM. It's great to see your company helping our platform advance at the track.

I like the idea of running a lightweight seat. Perhaps down the line I may think about that.
I'm glad you like it, hopefully we will be stocking the lightweight seat set up. We are going to make it so it is a simple bolt in installation. I am just working on how to make all the mounts adjustable so it will fit each driver.
Old 02-16-2011, 01:48 PM
  #13  
MBWorld Fanatic!
 
GHAZAN's Avatar
 
Join Date: May 2009
Location: Norte America
Posts: 1,463
Received 1 Like on 1 Post
MBUSA
recaro pp or sparco dtm cfs....its hard to find any seat bracket information for MBs
Old 02-16-2011, 02:01 PM
  #14  
MBWorld Fanatic!
 
dodger63's Avatar
 
Join Date: Oct 2008
Location: Northport N.Y.
Posts: 3,317
Received 3 Likes on 2 Posts
2013 f250 6.7 diesel
Originally Posted by superlubricity
dodger, are you rocking a Race Seat now?

Were you when you went 10.87?
Almost. I got a sparco evo 3..

You no everything that was done for the 10.8 run!

I was going ***** to the wall for the 18th but now we have a heat wave..if anything good comes out of this week I will disclose all of my new mods and weight loss. I will say that after a 4.5 month wait I did receive the rear evo rotors so I'm happy about that.

My sparco evo 3 seat and custom bracket weighs in @ 25lbs so it's approx 40lbs weight savings.. And actually extremely comfortable.. I'm contemplating leaving it in full time along with a reg evo passanger seat. That would be a 80lb weight savings everyday!
Old 02-16-2011, 02:02 PM
  #15  
MBWorld Fanatic!
 
dodger63's Avatar
 
Join Date: Oct 2008
Location: Northport N.Y.
Posts: 3,317
Received 3 Likes on 2 Posts
2013 f250 6.7 diesel
Originally Posted by GHAZAN
recaro pp or sparco dtm cfs....its hard to find any seat bracket information for MBs
There are none This bracket should/will work on all side mount seats
Old 02-16-2011, 02:03 PM
  #16  
Former Vendor of MBWorld
Thread Starter
 
Staff@RPM's Avatar
 
Join Date: Feb 2005
Location: Long Island, NY
Posts: 1,209
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by GHAZAN
recaro pp or sparco dtm cfs....its hard to find any seat bracket information for MBs
I looked at the Sparco site but I could not find the seat that you were talking about, can you send me a link?
Old 02-16-2011, 02:10 PM
  #17  
MBWorld Fanatic!
 
dodger63's Avatar
 
Join Date: Oct 2008
Location: Northport N.Y.
Posts: 3,317
Received 3 Likes on 2 Posts
2013 f250 6.7 diesel
Originally Posted by Staff@RPM
I looked at the Sparco site but I could not find the seat that you were talking about, can you send me a link?
Craig I believe those are on the side if the site for the rich people. They would need to do a credit check.. Haha just kidding I believe those are the same as the evo 5 times more $$ and save 4lbs if I'm correct
Old 02-16-2011, 02:12 PM
  #18  
MBWorld Fanatic!
 
SonnyakaPig's Avatar
 
Join Date: Aug 2010
Posts: 2,494
Likes: 0
Received 3 Likes on 3 Posts
MB
Originally Posted by Staff@RPM
I'm glad you like it, hopefully we will be stocking the lightweight seat set up. We are going to make it so it is a simple bolt in installation. I am just working on how to make all the mounts adjustable so it will fit each driver.
Awesome.

"bolt in" -- a new type of go-fast mod.
Old 02-16-2011, 02:15 PM
  #19  
MBWorld Fanatic!
 
SonnyakaPig's Avatar
 
Join Date: Aug 2010
Posts: 2,494
Likes: 0
Received 3 Likes on 3 Posts
MB
Originally Posted by dodger63
Almost. I got a sparco evo 3..

You no everything that was done for the 10.8 run!

I was going ***** to the wall for the 18th but now we have a heat wave..if anything good comes out of this week I will disclose all of my new mods and weight loss. I will say that after a 4.5 month wait I did receive the rear evo rotors so I'm happy about that.

My sparco evo 3 seat and custom bracket weighs in @ 25lbs so it's approx 40lbs weight savings.. And actually extremely comfortable.. I'm contemplating leaving it in full time along with a reg evo passanger seat. That would be a 80lb weight savings everyday!
That's what I was thinking of doing down the road. Such a good weight savings.

Must have felt good to finally receive the rotors.
Old 02-16-2011, 02:20 PM
  #20  
Former Vendor of MBWorld
Thread Starter
 
Staff@RPM's Avatar
 
Join Date: Feb 2005
Location: Long Island, NY
Posts: 1,209
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by GHAZAN
recaro pp or sparco dtm cfs....its hard to find any seat bracket information for MBs
Can you tell me which seat it is on this guide. If it is a side mount seat and I get dimension D I can get a seat bracket made to fit the seat to the C63.

http://www.sparcousa.com/resourceFiles/26.pdf
Old 02-16-2011, 02:34 PM
  #21  
MBWorld Fanatic!
 
Even Money's Avatar
 
Join Date: Jul 2009
Location: PNW
Posts: 1,749
Likes: 0
Received 1 Like on 1 Post
'15 VW GTI
You have any 17" wheel options?
Old 02-16-2011, 02:37 PM
  #22  
Out Of Control!!
 
dynomite05's Avatar
 
Join Date: Apr 2008
Location: Jerzy
Posts: 10,275
Likes: 0
Received 9 Likes on 9 Posts
04 CLK 320 > CLK32K
RPM, any pics of these seats? Sorry if I missed the link. I will take some measurements and let you know. Thanks for the help.
Old 02-16-2011, 02:43 PM
  #23  
Former Vendor of MBWorld
Thread Starter
 
Staff@RPM's Avatar
 
Join Date: Feb 2005
Location: Long Island, NY
Posts: 1,209
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Even Money
You have any 17" wheel options?
I will have different wheel options and tire options available soon. We are still trying some different things out.

Originally Posted by dynomite05
RPM, any pics of these seats? Sorry if I missed the link. I will take some measurements and let you know. Thanks for the help.
We will have pictures in the next couple of weeks. I just ordered 5 seats and I have to drive about an hour away to get them when they come in so I plan on getting them the end of next week because this weekend I will be going to MIR.
Old 02-16-2011, 02:47 PM
  #24  
MBWorld Fanatic!
 
mthis's Avatar
 
Join Date: Jun 2008
Location: Ny
Posts: 4,453
Received 30 Likes on 29 Posts
Anything W/4Wheels
thanks to the both of you for making this happen, i know if it wasn't for mike's dedication this would not happen. tnx pal

Craig, thanks for helping me and teaching me, i feel like im going to run 10's in 70F bc of you 2 guys. if i do WolfGangs on me one night. (best stake in the city)
Old 02-16-2011, 03:01 PM
  #25  
Former Vendor of MBWorld
Thread Starter
 
Staff@RPM's Avatar
 
Join Date: Feb 2005
Location: Long Island, NY
Posts: 1,209
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by mthis
thanks to the both of you for making this happen, i know if it wasn't for mike's dedication this would not happen. tnx pal

Craig, thanks for helping me and teaching me, i feel like im going to run 10's in 70F bc of you 2 guys. if i do WolfGangs on me one night. (best stake in the city)
I like Wolfgangs. We'll go to Wolfgangs on you one night (definitely agree best steak in the city) and then we will go to Sammy's on me (most fun steakhouse in the city). Mike hates the city but we will drag him out.

Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: DRAG RACING PARTS AVAILABLE NOW!!!!



All times are GMT -4. The time now is 09:51 PM.