Merc63

If anyone is running MHP headers with 3 inch mids. I have 3 extra X pipes for sale. They are 325 each plus shipping. They are made from mild steel and painted with high temp exhaust paint.

Below is a pic of them bead blasted awaiting paint.



This would have to be installed at a good exhaust shop. Install time is 1.5.-2hrs. The mids and X pipe have to be cut and welded together. The X pipe then slides right into the resonator connectors and clamped in place. This is an addon to the MHP system so if you wanted to remove the MHP system and install your stock exhaust you could as nothing on the stock exhaust is cut or changed.



The only piece of the MHP system that is cut is the mids. As the X pipe has to be welded to them. As you can see the X pipe slides into the resonator connectors and is clamped in place.

Please PM me if you want to grab one of these.. Below is a link of some sound clips after the install.

http://s1048.photobucket.com/albums/...t=IMG_1005.mp4

http://s1048.photobucket.com/albums/...t=IMG_1002.mp4

Merc63

This X pipe might also work for other setups too. If you can take a measurement of the spacing between the catless mids, I can tell ya if it might work or not...

balthaser

I have resonator removed, else remains stock. so will this be direct fit?

Merc63

You have the stock exhaust system?

I am not sure, I'd have to get a measurement of the distance between the two pipes... And I am not sure if they are 3 inch diameter??

If you can get under ur car and measure exactly how close the pipes are when the run parallel together into where the resonator would be then I can tell ya if it will fit...

Merc63

These unfortunately wont work on the stock exhaust system.. Its too small and wider... If anyone is interested, we could get something fab'd up that would fit on the stock system...

Zod

interesting color for the coating

but can't seem to figure out why you have 4 sets?
GL with the sale!

Merc63

That isn't a color. That's what metal looks like when it's bead blasted awaiting paint.

I have 3 left, 1 is sold and waiting to hear back from the Others that showed interest in buying one... So that's why there is 4 sets mr obvious.

Merc63

Bump, 3 of these still left.. Anyone want them, let me know please?

Merc63

https://mbworld.org/forums/c63-amg-w...ip-follow.html


Link to my thread with videos of how it sounds with this installed.

SSSSE YA

I am looking for a X pipe and resonator delete set up to replace my stock system.

Merc63

If you are serious PM me and we can work something out.. I have my stock system here so it would be easy to fab something up for that...

SSSSE YA

PM sent.