Convert to facelift hedlights

[Sohlberg]

hello can anyone help me to solve my problem i have a MB C63 AMG 2010 with xenon and ILS Headlights I Bought new Headligts from The new 2012 C63 Amg xenon With ILS when i fit the new headlights to my car i saw that my old headlights have more pin connectors then the new one the only thing that works is the low beam can anyone help me to solve my problem i have access to the orginal Mb star diagnos do i need a new wiring harness to the headlights and the front Sam module i work on a mb Workshop and i contacted Mb in sweden but no response so thanks for all help sorry for my bad english jonas

To remove this ad, register today or login if you already are registered!

[vessproms]

Do you have new hood , fender and bumper?

[Faris63]

Originally Posted by vessproms

Do you have new hood , fender and bumper?

I don't think he need a fenders and bumper

[vessproms]

the facelift headlight is in totally different shape with the old ones. Im pretty sure he needs facelift fender, hood and bumper so that he can fit the headlights it

[hamdanalqubaisi]

nop , im doing the face lift also right know, waiting for the 2012 head lights to come in, had my carbon vented dads hood cut and modified to match the new lights and had the fitment tested on my friend 2012 c63, the fenders stay the same so dose the front bumper if you dont wish to change it, i ordered the dtm bumper like fares car without the side markers and with carbon lip and led, so know the front end will look some how as the 2012 dtm c63,

basically you need just a hood to install the new light, concerning the wiring question i have still no idea how is it going to go but im sure it can be done as their are some on my friends with 2 c63s have done it .

btw if you go on the german ebay ,you can also find the face lifted dash board for 600 eur and the screen with the buttons for 1600 eur and the new steering wheel for cheap, also the ac vent relocation part behind the dash is available for sale on the german ebay. so basically you could update your whole car exterior and int if you wish so.

the only thing im struggling with right now is trying to retro fit the keyless go with the push start button because my car is not equipped with it. and you cant get the amg traction button beside the shift **** on the 2012 as it is a different transmission. that is were i got to so far .

[Sohlberg]

Hello i have à new Hood and bumper the fienders are the same

Its just the wiring that worries My

I work at mb workshop and i contacted swedish support but no intressed to help me

So can someone help me

Thanks Jonas

[Faris63]

Originally Posted by hamdanalqubaisi

nop , im doing the face lift also right know, waiting for the 2012 head lights to come in, had my carbon vented dads hood cut and modified to match the new lights and had the fitment tested on my friend 2012 c63, the fenders stay the same so dose the front bumper if you dont wish to change it, i ordered the dtm bumper like fares car without the side markers and with carbon lip and led, so know the front end will look some how as the 2012 dtm c63,

basically you need just a hood to install the new light, concerning the wiring question i have still no idea how is it going to go but im sure it can be done as their are some on my friends with 2 c63s have done it .

btw if you go on the german ebay ,you can also find the face lifted dash board for 600 eur and the screen with the buttons for 1600 eur and the new steering wheel for cheap, also the ac vent relocation part behind the dash is available for sale on the german ebay. so basically you could update your whole car exterior and int if you wish so.

the only thing im struggling with right now is trying to retro fit the keyless go with the push start button because my car is not equipped with it. and you cant get the amg traction button beside the shift **** on the 2012 as it is a different transmission. that is were i got to so far .

Can't wait to see it Hamdan
Post some pictures when its done

[manuel009]

So do you think that the dim bumper will fit without problem on the 2012 model?
i'm still trying to understand it...
If yes i'll buy immediately but i'm scared about it.

[Sohlberg]

Originally Posted by manuel009

So do you think that the dim bumper will fit without problem on the 2012 model?
i'm still trying to understand it...
If yes i'll buy immediately but i'm scared about it.

hello

the 2012 bumper fits with my old fenders without no problem

its just the wiring to the new headlight i am worried about

waiting for help someone

thank jonas

[r0me0x]

Originally Posted by hamdanalqubaisi

nop , im doing the face lift also right know, waiting for the 2012 head lights to come in, had my carbon vented dads hood cut and modified to match the new lights and had the fitment tested on my friend 2012 c63, the fenders stay the same so dose the front bumper if you dont wish to change it, i ordered the dtm bumper like fares car without the side markers and with carbon lip and led, so know the front end will look some how as the 2012 dtm c63,

basically you need just a hood to install the new light, concerning the wiring question i have still no idea how is it going to go but im sure it can be done as their are some on my friends with 2 c63s have done it .

btw if you go on the german ebay ,you can also find the face lifted dash board for 600 eur and the screen with the buttons for 1600 eur and the new steering wheel for cheap, also the ac vent relocation part behind the dash is available for sale on the german ebay. so basically you could update your whole car exterior and int if you wish so.

the only thing im struggling with right now is trying to retro fit the keyless go with the push start button because my car is not equipped with it. and you cant get the amg traction button beside the shift **** on the 2012 as it is a different transmission. that is were i got to so far .

Good to know! If i decide to do later!

[manuel009]

Also the fit holes when you remove the two bumpers are the same? do you can plug and play both?

[Sohlberg]

Originally Posted by manuel009

Also the fit holes when you remove the two bumpers are the same? do you can plug and play both?

yes the new bumper was plug and play

do you know someone who can help me with the wiring to the new headlamps

thanks jonas

[manuel009]

I have the 2012 model. if you need some photos or spec let me know and i'll post everything.

[bhamg]

I'm interested in doing this also because I both need a new front bumper cover and have a spare CF hood to throw at it. Is there anything my SA can get or print out for me that would help out re. the wiring?

[Sohlberg]

Originally Posted by bhamg

I'm interested in doing this also because I both need a new front bumper cover and have a spare CF hood to throw at it. Is there anything my SA can get or print out for me that would help out re. the wiring?

Sorry i mean wiaring to the headlights.
Thats My problem

Tankas jonas

[Sohlberg]

Anyone knows about the wiaring.


Tanks for all help i can get

[bhamg]

Originally Posted by Sohlberg

Anyone knows about the wiaring.


Tanks for all help i can get

Would a wiring diagram of the sub-harness to the headlight for both the pre- and face lifted versions help?

[Sohlberg]

Originally Posted by bhamg

Would a wiring diagram of the sub-harness to the headlight for both the pre- and face lifted versions help?

Yes it would help to start with i wonder. If it is à differentiering Sam module front


Thanks jonas

[Sher Judge]

This will be interesting

[arspider]

Hi there, I have my self converted a 09 to a 2012 facelift... it is my daily... still have not figuerd out the wiring... I got my headlamps to wrok on low beams only... if there is any kind of an update regarding this matter count me in... I did, hood, bumper, front grill, head lamps, oilcooler duct (to fit 2012 bumper). the list is much longer than that but those are the basics...

TONY

[jp825]

does anyone know where I can get a facelift grille from? does anyone have the part no?

[Sohlberg]

Originally Posted by arspider

Hi there, I have my self converted a 09 to a 2012 facelift... it is my daily... still have not figuerd out the wiring... I got my headlamps to wrok on low beams only... if there is any kind of an update regarding this matter count me in... I did, hood, bumper, front grill, head lamps, oilcooler duct (to fit 2012 bumper). the list is much longer than that but those are the basics...

TONY

I wonder if i should try with à new sam module and new harness

I work at à mb workshop so i have good price in parts

[Sohlberg]

Haven't somebody done this mod

Help me

Tanks jonas

[bhamg]

Sohlberg - I'll have an answer on the wiring diagram around the end of the month. My SA (a friend) won't be back until then. I'm proceeding with the facelift also so together we all might be able to figure it out.

[Sohlberg]

Originally Posted by bhamg

Sohlberg - I'll have an answer on the wiring diagram around the end of the month. My SA (a friend) won't be back until then. I'm proceeding with the facelift also so together we all might be able to figure it out.

Ok thanks the only things that works is Low beam

I Wonder if its easier to by facelift harness

Thanks Jonas