ed4

Hey gang,

Does anyone know how to take off the chrome surrounding trim for the DRL's? Do they pull right out? I tried pulling on these, but no dice.

I'm looking to do a DIY vinyl wrap on these pieces.

Thanks for reading

SaphGreyC63

No idea, but when you do find out, a DIY with pics and instructions would be amazing!

N91K

Anyone?

TEKZILLA

Plastidip if you can't get 'em out easily

https://mbworld.org/forums/c63-amg-w...t-removal.html

N91K

Yeah mine are plasti dipped for now!

mvagusta

anyone know how to remove them?

Brent95M3

They just pop out once you pull on them. I was able to do it with my fingers. I plastidipped and put em back on.

Brent95M3

Are you talking about the fogs? If not then disregard.

ed4

The daytime running lights inside each air scoop. Front bumper.

abcut973

I think the best way to do it is to remove your bumper. You need to pry them out.

natman316

I just wrapped them with it on the car...

btw is there a tutorial on how to remove the bumper? It looks really complicated LOL. i want to do the front lip for my 2012 which i believe needs bumper removal

abcut973

Removing the front bumper is not that complicated. 2 10mm bolts on each side (behing the wheel well), 2 10mm bolts on each side of the grill, a few torx 15 underneath and that's pretty much it

natman316

Oh ok. Do we need to disconnect the DRL, sidemarkers, headlamp washers etc?

abcut973

You need to disconnect the DRLs, and sidemarkers only

edit: and the temp sensor as well

justdjames

I dont like the dtr lights , so I just installed black acrylic over them and drive with the 'C" lights....

RebelAuto

I wrapped mine with CF vinyl while they were still on the car.....there is decent enough returns around them to tuck in the edges..

Ekort

have you checked ebay?

Thrilla

I had the LED DRL vinyl wrapped while on the car too.