THE DEVIL from AMG and his SON - Satin Guard Paint Protection
#1
Former Vendor of MBWorld
Thread Starter
THE DEVIL from AMG and his SON - Satin Guard Paint Protection
Project soon to begin! Stay tuned. Be sure to subscribe and check us out on facebook:
https://www.facebook.com/premier.protective
https://www.facebook.com/premier.protective
#2
Former Vendor of MBWorld
Thread Starter
Since this Black Series is pre-owned, the new owner does not like the dark tinted windows (we rated it at under 20%), so off it comes. In goes the latest in window film technology - Spectra PhotoSync Nano Tint. We will be installing 45% all around + 75% on the windshield.
There is also a band of tint on the top of the windshield that MUST go.....just does not fit in this car!
There is also a band of tint on the top of the windshield that MUST go.....just does not fit in this car!
#4
Looks familiar!
Can't wait to see it when its done!! You guys have an incredible shop. And that CLK DTM was an amazing car in person. Only 1 of 5 in the US!!!!
Can't wait to see it when its done!! You guys have an incredible shop. And that CLK DTM was an amazing car in person. Only 1 of 5 in the US!!!!
Last edited by neoprufrok; 01-17-2013 at 10:59 AM.
Trending Topics
#9
#11
Former Vendor of MBWorld
Thread Starter
We do not know of any, but the manufacturer of Satin Guard may have an authorized dealer in your area:
Manufacturer: Prestige Film Technologies
Site: www.prestige-films.com
Contact: vtran@prestige-films.com
Contact #: 408-657-3880
Manufacturer: Prestige Film Technologies
Site: www.prestige-films.com
Contact: vtran@prestige-films.com
Contact #: 408-657-3880
#12
Former Vendor of MBWorld
Thread Starter
Now, let's get the tint off. First, we always want to show the efficacy of the products we put in our clients' vehicles. We pulled the tint off and put it to a BTU test.
First, here is a BTU reading at 3pm with no tint
Here is the reading from the previous tint we pulled off:
Spectra PhotoSync at 45%, which is over 25% lighter than the previous tint:
First, here is a BTU reading at 3pm with no tint
Here is the reading from the previous tint we pulled off:
Spectra PhotoSync at 45%, which is over 25% lighter than the previous tint:
#13
Former Vendor of MBWorld
Thread Starter
Every panel on this C63 Black Series is covered since the paint is OEM matte....a paint to maintain and if it chips / scratches, very difficult to match. So the owner of this fine machine did it right by protecting his investment.
#15
Former Vendor of MBWorld
Thread Starter
Another Satin Guard vehicle decided to join the party....car just trucked in from San Diego just for us to work on. Wonder what's inside............
#19
Former Vendor of MBWorld
Thread Starter
Let's get this one moving. To recap this project:
Satin Guard paint protection film - NOT MATTE VINYL
*approximately 3-4 times thicker than vinyl, Satin Guard is a translucent paint protection film (similar to clear bra) that is enhanced with satin metallic flakes.
*it is also highly oil resistant, so finger prints and oils do not show up like matte vinyl
Spectra PhotoSync Nano Tint
*blocks out 98.5% of infrared rays. What does this really mean? For comparison purposes, regular dyed window tint only blocks out 20%-30% of infrared.
Have to make sure we protect these carbon fiber pieces on the front:
After removing the old tint, we start prepping for Spectra PhotoSync 45% to be installed to the car.
Satin Guard paint protection film - NOT MATTE VINYL
*approximately 3-4 times thicker than vinyl, Satin Guard is a translucent paint protection film (similar to clear bra) that is enhanced with satin metallic flakes.
*it is also highly oil resistant, so finger prints and oils do not show up like matte vinyl
Spectra PhotoSync Nano Tint
*blocks out 98.5% of infrared rays. What does this really mean? For comparison purposes, regular dyed window tint only blocks out 20%-30% of infrared.
Have to make sure we protect these carbon fiber pieces on the front:
After removing the old tint, we start prepping for Spectra PhotoSync 45% to be installed to the car.
#20
MBWorld Fanatic!
Are you doing a double tint or are you simply getting the shape of the rear window and then will be installing on the inside only?
#21
Former Vendor of MBWorld
Thread Starter
The original tint must be removed first. Then we have to heat shrink the film to the conform to the curvature of the rear glass. After the film is shrunk, then it is installed to the interior of the window.
#25
Senior Member
Join Date: May 2011
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
C63 Coupe Edition 1
You guys do amazing work! You did the front fender of my C63 Edition 1 and once it had time to cure it looks great and actually matches the rest of the car really well.