amgboyw204

DC a10 Concave wheels 19 x8.5. 35 offset 225 25 19 tires 19x9.5. 40 offset 255 30 19 tires Finish Machine silver and gunmetal Am asking for $800 if anyone is interested . Thanks.



V style trunk lid carbon fiber $130

raz3091

Where are you located?

amgboyw204

Maryland

Roswell

These offset wont fit our C63.

AMG893

Front are fine.
Rear needs to be 45 or more on a 9.5"

Matt could probably weigh in though, i know he loves his crazy offsets!

raz3091

The offsets are prefect. I'm running 19x8.5 +35 front and 19x10 +40 rear.

Kriston

These offsets will fit fine on our cars. Especially with a 255 rear wide tire.

abcut973

What tire size do you run???

Yeah well 255 for the look is OK. But traction wise not ideal particularly for a C63

raz3091

245/35 and 275/35 AD08R

abcut973

10x19 ET40 with 275/35 in rear ?? You must be rubbing.
Are you lowered?
Pics please.

Kriston

To be honest bud, I don't have much issue with traction on a set of sticky 255's and LSD.

abcut973

For sure LSD helps. In my case even on 275 on wet roads I was always struggling.

Kriston

I can almost bet he isn't lowered. With an ET40 offset on the rear and a 19 x 10 rim, he will be poking a bit for sure.

olszowa12

The wheels look very Vossen-like and as far as I know, 19" CV3s do not clear the C63 brake calipers.

I ran 9.5x19 ET43 with 235/35/19 Dunlops in the rear on H&R coils lowest setting - no rubbing.
Later on, I raised the car to H&R springs level and changed the tires to 255/30/19 - no rubbing.

Kriston

I just test fitted my new wheels and we can do an ET40 offset no problem in the rear with a 255 wide tire. This is lowered as well (not slammed) but enough to be comfortable and eliminate the wheel gap.

jordanaf

FYI:

These are coming off a NON-AMG car!!

raz3091

This is when I had Michelin PS2 275/35 in the rear. I'm lowered on Fortune Auto Coilovers.

abcut973

You should have post a side pic to see how you are flush.
Based on that picture you do not look flusher than me and I'm +48 in the rear. I might be wrong
Don't you rub? That tire is too close to the fender

raz3091

This might be a better way to show it. ONLY time I rubbed was adjusting the coilover to the right ride height that why if you paused it you can see where it rubbed, but after trial and error it sits perfectly where it does not rub anymore. And of course that was with the old tires PS2. Currently running AD08R same size. No fender pulling. Sorry to amgboyw204 for posting all my crap on his thread.

Roswell

Your set-up looks like 19x10 +48... not +40. You should double check that infos since Forgestar doesn't stamp their offset inside the wheel.

raz3091

It's +40

Roswell

Here is my 19x10 +50 w/ 275/30/19 ... add 10mm spacers & I would be shredding tires. LOL

Maybe you do have 19x10 +40 w/ 275/30/19 ... but your fenders are rolled or pulled?

amgboyw204

Anyone interested in the wheels I'm also lowered on h&r super sport spring No rubbing issues