mr747

Hi guys

I'm going to be ordering the weistec tranny with the upgraded torque converter soon

Just wondering if any forum members can comment on the stall converter??

Any feed back would be greatly appreciated
I.e how is it with everyday street driving
Any issues etc etc

Thanks guys

Merc63

I wouldn't get the TC myself. Heard guys breaking axles with it before. Also what are 60 foots with the TC? Because I did a 1.58 with the stock TC.

On the street 1st gear will spin even worse if that is possible.

Merc63

Jrcarts Clk does a 1.40-1.48 but that is with 1200+ HP and tons of suspensions mods. So realistically you could gain maybe 0.05 better 60... Which is a tenth on your time.

mr747

This is what I was after real world answers it sounds all good on paper

Thanks merc63

Anyone else using the upgraded TC
Food for thought I did a 1.65 60 for at 131mph and was experiencing slipping from 2-3 and 3-4 right at the end of 4th was the worst

I need to upgrade sooner then later

Merc63

remocr your passanger seat and back seats, spare tire and emergency kit.

Run with 1/4 tank fuel max.

60 will come down... Need a good cold night.

Your tranny is messed if it's slipping, better get the new one ordered it will take a while

Your mph is there, I did a 10.6 at that mph.

mr747

im already onto it

im happy with my first time out
once i sort this issue i will have another crack

Merc63

What was UR time

mr747

i have to look when i get home

ill let you know

mr747

im bring this back to life to see if anyone has installed in TC upgrade

Reason why is the tranny is on the way now and i dont want to make a mistake later on down the track and say i should have done is

But saying that it doesnt seem many people have done this upgrade
But i dont want to be axels and stuff

im confused

Merc63

Leave the stock torque converter. Spend the money on front skinnys instead.

charliekay

Did your tranny need to go to Weistec? I was talking to CPC about doing the tranny as well.

mr747

Yep it's on the way now left today

charliekay

Good luck.

Who is doing it for you? PM me the price including shipping if you don't mind.