2 codes I cannot figure out
09-27-2015, 12:43 PM
#1
Super Member
Thread Starter
2 codes I cannot figure out
Hey guys
I have the torque app and an OBD scanner. I was at Cars N Coffee today and a AMG tech who owns a pre facelift non p31 car (heavily modded) sat in my car at idle and said his is much smoother than mine. He said my CEL may not be on because it could be motor mount on one side as there was serious flex on the motor with hood open and revving or it could be something else. (intake gasket, etc) I will be dropping the car at his dealership next week for him to go over the car and do rear diff fluid change and oil change and he will go over the whole thing.
Anyway just curious on these 2 codes torque app pulled.
P1351
and
P0613
The web didnt help much as far as on C63.
Good news is i drove the car very very hard today and got 0 misfires. The slightly rough idle is always at a stop and the light tap misifire feel happens at red lights etc. I cannot figure it out. Hope this guy can.
I have the torque app and an OBD scanner. I was at Cars N Coffee today and a AMG tech who owns a pre facelift non p31 car (heavily modded) sat in my car at idle and said his is much smoother than mine. He said my CEL may not be on because it could be motor mount on one side as there was serious flex on the motor with hood open and revving or it could be something else. (intake gasket, etc) I will be dropping the car at his dealership next week for him to go over the car and do rear diff fluid change and oil change and he will go over the whole thing.
Anyway just curious on these 2 codes torque app pulled.
P1351
and
P0613
The web didnt help much as far as on C63.
Good news is i drove the car very very hard today and got 0 misfires. The slightly rough idle is always at a stop and the light tap misifire feel happens at red lights etc. I cannot figure it out. Hope this guy can.
09-29-2015, 01:11 PM
#2
MBWorld Fanatic!
10-01-2015, 09:32 PM
#3
Super Member
Thread Starter
So I got the rear diff fluid changed and oil changed. My AMG guy told me he believed my rough idle is coming from the intake manifold gaset. Confirmed it by spraying something around the edge and it bogged down when he got to one part. I will be taking it into the dealer next week for him to replace that gasket.
