Turning off TPMS sensors from display using SDS tool
#1
Member
Thread Starter
Join Date: Nov 2013
Location: Overland Park, KS
Posts: 120
Likes: 0
Received 7 Likes
on
3 Posts
Alpha 9+4.2 GT-R > Caged 997 911 EVT750 > Noble M12 GTO-3R > 09' C63 > Xterra Off-Road
Turning off TPMS sensors from display using SDS tool
Hi guys,
Is it possible to turn off the warnings and TPMS sensor functions using a SDS tool and if so, how would you do it?
I am annoyed by them. In the 2009 model, it does not show the actual values or readings per tire/wheel...just gives a warning when pressure has dropped beyond a certain point.
I have access to a SDS tool and would like to turn off the TPMS system completely.
Thanks for any insight.
Is it possible to turn off the warnings and TPMS sensor functions using a SDS tool and if so, how would you do it?
I am annoyed by them. In the 2009 model, it does not show the actual values or readings per tire/wheel...just gives a warning when pressure has dropped beyond a certain point.
I have access to a SDS tool and would like to turn off the TPMS system completely.
Thanks for any insight.
#2
MBWorld Fanatic!
Join Date: Nov 2009
Location: Relocated
Posts: 4,418
Received 381 Likes
on
237 Posts
2010 Irridium Silver MB C63 AMG Sedan
I have tried consulting with dealer on this numerous times, matter of fact more than one dealer, and they said you couldn't. It's gets to be a pain to deal with when you and changing out wheels and don't need sensors or don't want to use them....GL