Factory Rear Seat Delete Part #'s
#26
Super Member
Was an extremely limited market but prices are coming down and people are modding C63's more than ever. Have you seen all the "carbon" parts littered out there for our cars that no one runs?
If I can find a Black Series C63 overseas with factory seat delete willing to be a test mule, a simple FRP (Low cost) sheet based off OE or slightly modified. That way you can wrap it in carbon, paint it gloss or matte, flock it alcantara etc.
I'm confident that if we get at least 10 members, we can get it going.
If I can find a Black Series C63 overseas with factory seat delete willing to be a test mule, a simple FRP (Low cost) sheet based off OE or slightly modified. That way you can wrap it in carbon, paint it gloss or matte, flock it alcantara etc.
I'm confident that if we get at least 10 members, we can get it going.
#27
Was an extremely limited market but prices are coming down and people are modding C63's more than ever. Have you seen all the "carbon" parts littered out there for our cars that no one runs?
If I can find a Black Series C63 overseas with factory seat delete willing to be a test mule, a simple FRP (Low cost) sheet based off OE or slightly modified. That way you can wrap it in carbon, paint it gloss or matte, flock it alcantara etc.
I'm confident that if we get at least 10 members, we can get it going.
If I can find a Black Series C63 overseas with factory seat delete willing to be a test mule, a simple FRP (Low cost) sheet based off OE or slightly modified. That way you can wrap it in carbon, paint it gloss or matte, flock it alcantara etc.
I'm confident that if we get at least 10 members, we can get it going.
#28
MBWorld Fanatic!
If someone can find me a link to buy the parts ill test it out to see if it fit sedan if not it will get choped up made to fit.
I want this rear seat delete bad. i cant stand the noise and smell without rear seats and nothing to block the trunk.
I want this rear seat delete bad. i cant stand the noise and smell without rear seats and nothing to block the trunk.
#29
MBWorld Fanatic!
I am not convinced of the hard carbon fiber approach. A basket (or 2 half baskets) in soft material to hold helmets between runs or some other smaller luggage items would be more useful.
#30
MBWorld Fanatic!
Thread Starter
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,045
Received 2,810 Likes
on
1,664 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
Agree. Think it's a terrible idea. I want carpeted buckets back there, not reflective slippery scratch-able carbon. Zero purpose.
Even like this (from a CLK BS:
Even like this (from a CLK BS:
Last edited by BLKROKT; 01-12-2016 at 07:53 AM.
#32
Senior Member
Any updates on these?? id be interested. I don't know if a bs seat delete would word on a pre-fl sedan or not but if there was an aftermarket option
#34
i am also interested
i like that carbon option also
i like that carbon option also
#35
MBWorld Fanatic!
Thread Starter
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,045
Received 2,810 Likes
on
1,664 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
Yeah, I'll get back on it. I'm kinda full with projects right now so this might wait a month or two.
#36
Senior Member
I wonder how much a fab shop would charge to measure out the area needing to be covered and cut either carbon fiber or aluminum with some type of leather or cloth cover... maybe something that clips into factory mounting areas and can be removed if seats needed to be put back...
i found this shop locally in orlando http://www.compositecraftinc.com/index.html
website says they offer in house cutting and CAD design services... ill try reaching out to them
#37
for sure!
I wonder how much a fab shop would charge to measure out the area needing to be covered and cut either carbon fiber or aluminum with some type of leather or cloth cover... maybe something that clips into factory mounting areas and can be removed if seats needed to be put back...
i found this shop locally in orlando http://www.compositecraftinc.com/index.html
website says they offer in house cutting and CAD design services... ill try reaching out to them
I wonder how much a fab shop would charge to measure out the area needing to be covered and cut either carbon fiber or aluminum with some type of leather or cloth cover... maybe something that clips into factory mounting areas and can be removed if seats needed to be put back...
i found this shop locally in orlando http://www.compositecraftinc.com/index.html
website says they offer in house cutting and CAD design services... ill try reaching out to them
Im keen as for some CF
#38
MBWorld Fanatic!
Thread Starter
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,045
Received 2,810 Likes
on
1,664 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
Projects got delayed and pushed back on my end. I'll do this in the fall or winter.
#39
#42
the price is crazy! I asked my local benz dealer for that two piece. Guess the price. 5800 CAD for one piece!!! Crazy