hit the track over the weekend
#1
MBWorld Fanatic!
Thread Starter
hit the track over the weekend
Hey guys
i hit the track on friday night after upgrading to the stage 3 and gained 5mph over the stage 2 blower
done 3 passes with all 136 mph on pump 98 fuel full interior
before i added the stage 3 i went with coilovers and never tested and the car has gone backwards
so i will have to do more testing with the suspension and hopefully the time tumbles
will be back out there this weekend
Next upgrade after the suspension is sorted is a full 3in exhaust and mbh 2in primary headers
The IPE exhaust is holding back the full potential of the stage 3
i hit the track on friday night after upgrading to the stage 3 and gained 5mph over the stage 2 blower
done 3 passes with all 136 mph on pump 98 fuel full interior
before i added the stage 3 i went with coilovers and never tested and the car has gone backwards
so i will have to do more testing with the suspension and hopefully the time tumbles
will be back out there this weekend
Next upgrade after the suspension is sorted is a full 3in exhaust and mbh 2in primary headers
The IPE exhaust is holding back the full potential of the stage 3
#2
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,044
Received 2,810 Likes
on
1,664 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
Damn 136 is moving man
The following users liked this post:
mr747 (04-03-2016)
#3
MBWorld Fanatic!
Thread Starter
#5
MBWorld Fanatic!
Thread Starter
bilstein b16 coilovers with adj rebound and compression my 60ft times have gone backwards over my factory suspension setup
Trending Topics
#9
MBWorld Fanatic!
Thread Starter
yes stock motor
im pretty happy with 136 considering im using a exhaust that is chocking the blower
i heard good things from the bilstein and converting the US to AUD when i wanted to purchase the KW was just not worth it
but now the dollar is going back up (just my luck)
i just need to fine tune the suspension setup
im pretty happy with 136 considering im using a exhaust that is chocking the blower
i heard good things from the bilstein and converting the US to AUD when i wanted to purchase the KW was just not worth it
but now the dollar is going back up (just my luck)
i just need to fine tune the suspension setup
#10
Senior Member
Join Date: Oct 2008
Location: Markham
Posts: 351
Likes: 0
Received 25 Likes
on
21 Posts
07 Z06, 2011 c63pp
yes stock motor
im pretty happy with 136 considering im using a exhaust that is chocking the blower
i heard good things from the bilstein and converting the US to AUD when i wanted to purchase the KW was just not worth it
but now the dollar is going back up (just my luck)
i just need to fine tune the suspension setup
im pretty happy with 136 considering im using a exhaust that is chocking the blower
i heard good things from the bilstein and converting the US to AUD when i wanted to purchase the KW was just not worth it
but now the dollar is going back up (just my luck)
i just need to fine tune the suspension setup
Hopefully you get them dialed in.
#13
MBWorld Fanatic!
Thread Starter
#14
MBWorld Fanatic!
If you haven't already, I'd talk to JRcart about suspension setups. Pretty sure he (along with a few others) could give you some good advice.
That trap has us all waiting for the future runs. Good stuff
That trap has us all waiting for the future runs. Good stuff
#17
MBWorld Fanatic!
Well done brad. With better exhaust and better fuel 140mph is in site. It will be another car from Aus proving the weistec stage 3 kit is just bad ***!! Hopefully I'm not too far away to join the party.
#18
MBWorld Fanatic!
Thread Starter
Seems i screwed up the geometry of the car when i tried to raise the car my self
Dropped the car off at the wheel aligner and he actually laughed at me lol what i thought i made soft was at the hardest setting lol
any how cut a long story short his gonna have it all setup for me to pickup friday as im hiting the track on SUnday
Hopefully the 60ft time comes down and start running decent times
ill report back
Dropped the car off at the wheel aligner and he actually laughed at me lol what i thought i made soft was at the hardest setting lol
any how cut a long story short his gonna have it all setup for me to pickup friday as im hiting the track on SUnday
Hopefully the 60ft time comes down and start running decent times
ill report back
#19
MBWorld Fanatic!
Brad the new blower is making some nice work. Just for comparisons sake, your already approaching Mclaren 650S / lambo hurrican numbers with the STG2 setup.
The cars making some Jam, I'm sure you can do low 10's with the new setup.
The cars making some Jam, I'm sure you can do low 10's with the new setup.