Speedriven1

SPEEDRIVEN V12 Biturbo Billet Idler Pulleys are ready to order!
This is a redesigned idler pulley made out of billet aluminum. They will be anodized in three colors: black, red and clear. The pulley's will come with a double bearing design ...allowing for better distribution of heat and load on the bearings themselves. These bearings are known for high failure on all the v12 biturbo motors, causing one to be stranded with a belt off. The pulley's are in stock and ready for anodizing to customers choice.


$70+shipping each


PayPal is sales@speedriven
When paying thru PayPal please give a description in the notes. What product and color.
Or give us a call and we can put in the order 847-485-8126


Black Anodized



The two pulley's shown in the picture below are the one's that fail. Our pulleys are a direct replacement.

__________________

BlownV8

They OEM ones will fail and it will leave you stranded. Ask me how I know.

xabo

Is this typical with the W216 also?

Speedriven1

Chassis does not matter. As long as its v12biturbo, they will fail sooner or later.

Speedriven1

They do fail when least expecting. We have had many customers tow in their cars for these pully's failing, so we decided to make a cure.

alx

yup. same here.

kamilclk430

Whats the price installed?

Speedriven1

$150 installed for you but only if you get pink

malahhaor

Sign me up for one but only if it comes with an engine

Speedriven1

Yeah no prob the total will be $12k

kamilclk430

Pink it is, when can you guys get the car in?

xabo

Damn! I was told the complete opposite by another vendor.......

Speedriven1

Im joking what color do you want black, clear or red, we can get you in end of next week?



Unless the newer ones have different pulleys its the same

kamilclk430

I think I will go with the clear but to me it really does not matter at all whatever u got in stock will work black is also good

Benzbias

Xabo - yes indeedee -
idler pulley - ABC pump ($2625 + labour) - both batteries ($800) - alternator - rotors replaced with each brake pad replacement - etc etc - a quality build?
repairs and maintenance $3000 per annum plus depreciation
welcome to MB country
Nice car tho - eh?

xabo

Yes Indeedee

OUTCAST

Nice work, I will need two put on my car since it is already there!

Speedriven1

Lol no problem

kk100

Are these difficult to fit? Just asking as I am in Ireland and would probably need to get someone to do it here.

Cheers

kamilclk430

I will call you tomorrow to set something up about bringing the car down. Gotta love this weather.

Speedriven1

No comment on the weather, its

kk100

Bump

Speedriven1

Install is very simple and quick. Only the belt has to be removed to replace them. There is enough room on all the chassis w220 w221 r230 w215 w216 to where the fan or anything else does not have to come off. I would suggest doing this on a cold engine as it is a bit tight at with a hot engine it might be a bit difficult.

Speedriven1

kamilclk430

Been trying to get out and get this installed, but the weather is not letting me drive out of the garage.