kamilclk430

You gotta do the lights they change the entire car. It was a great show too bad you missed it. I will maybe be talking to Speedriven about doing a BBQ and Cruise. If that pans out you have to make it out for sure.

You got any pics? lol why didn't you say Hi? We had nice cold Coronas

kamilclk430

New Update:

Talked to guys at Speedriven car is going in for tuning next week. I have been busy lately and same with the guys at Speedriven so hopefully not this coming weekend but next weekend I can try to get the car in the 10s.

Thericker

Nice.. Good luck!

Dr Matt

Awesome, hope you get dialed in and rip of some 10 second passes!

(Just not faster than 10.740)....j/k LOL

kamilclk430

Thanks

LoL nice recent runs Matt. I'm just looking for a 10.97 pass to get the stock turbo 600 record. I'm a lot of work away from a 10.74 pass I wish I had a 65 AMG.

kamilclk430

New update guys

Dropping the car off at Speedriven today after work, not sure if it will be ready tomorrow but if it is chances are I will be making some runs this weekend at the track. I will keep you updated tomorrow. Weather here is getting cooler so it might be a good chance to see what this thing can do once tuned.
I have moved up North just recently so now I'm only about a 15 min drive from the track, no excuses not to go and run

kamilclk430

Just an update picked up the car this past Friday looks like I had a boost leak, Im going back to the track this week or this coming weekend. Weather kinda sucks out here now but soon to be out there. I wanted to go this weekend but with the new house and all the construction going on I can barely even have time to get some sleep.

kamilclk430

V12Godspeed

Best of luck Bro!

Grip Grip

Did Marcin happen to mention where the leak was? Good luck on your next outing. Once the power stops dropping off after the 1/8th you're in for some 10's.

Thericker

As these V12 tt furnaces age, boost leaks become very common.. I had the entire Main OEM boost line under IC's replaced due to cracks & failing rubber joints due to the extreme hellish heat these things give off..

kamilclk430

Thanks Mang

Yes, the leak was on the intercooler seals going into the turbos. Both sides were giving out at higher boost.

I have to go over the entire car in the near future. I might be going the big boy route with the car with bigger turbos and built trans, but time will tell on whats next. First I have to accomplish some goals that I have set

kamilclk430

This weekend is go time I don't have much time this weekend but I will make time to hit the track for a few passes. Going back out on the 18s and we will see what the car can do.

Grip Grip

Good luck.

shardul

iTrader: (1)

Good Luck !!!!

Dr Matt

Good luck! Hope to see some 10 second time slips.

kamilclk430

Thanks Guys,

I hope I will have those 10sec slips up by end of weekend. If not I will still post my results.

BlownV8

Hope you get there. Be safe and have fun.

RaceHorse

Along with everyone else, I'm hoping to see this car run well for you in your quest to a 10 second slip. You have all the necessary hardware, hopefully the software is sorted, the driver is ready and the weather is on your side!!! Enjoy yourself, have fun and good luck!

BlownV8

How did you do?

Grip Grip

Update???????

kamilclk430

You guys don't want to know how I did trust me. But lets play a game and see who can get the closest time.

The track sucked big time no prep at all I did a good burnout but after 2 runs and 3 hour wait because of an event happening that night I decided to call it a day

My best 60ft out of the 2 runs was a 1.9 60ft. My MPH went up to 124 so what do you guys think my time was?

Im going back out this weekend to try to get my 60ft down, if I can get it to 1.6 again and stay with my MPH I'm gonna be looking at possibly a good run.

RaceHorse

11.71 is my guess... do we get a prize for being the closest??? On another note, get a LSD it becomes a power adder when you get to use the power you already have.

Grip Grip

11.8 is my guess based on the 60'.

320 dreamer

if the 60 ft goes down so does the mph . takes adding more power and traction to lower the 60 ft AND raise the mph