steering calibration?
05-05-2016, 07:41 AM
#2
MBWorld Fanatic!
The steering column only goes on the valve shaft one way, so there's not need to use a centering tool.
Obviously you need to set the toe-in.
There is a steering wheel position sensor which is calibrated by turning between the locks. Until you do, you get ESP etc errors.
Nick
Obviously you need to set the toe-in.
There is a steering wheel position sensor which is calibrated by turning between the locks. Until you do, you get ESP etc errors.
Nick
The following users liked this post:
principledchiro (06-26-2017)
