20" BBS CH-Rs w/H&R Sport Springs
#1
Member
Thread Starter
20" BBS CH-Rs w/H&R Sport Springs
Quick iPhone 6 pic on the driveway. 20" x 8.5" BBS CH-Rs on 235/30/20 Michelin Pilot Super Sports lowered with H&R Sport Springs. Setup done by Supreme Power here in Placentia, California (Orange County). Nick, Eric, & Tam are all stand-up and super knowledgeable guys and made sure everything came out perfect. Looks exactly how I wanted and couldn't be happier with what I paid. Absolutely no rub on curves, speed bumps, and with a stock wheel, OEM springs in the trunk along with my 100 lb. dog in the backseat. Will take more pics once the springs settle.
Test fitment @ Supreme Power. Wheels were mounted on some Nexen tires which didn't provide much of a sidewall.
Front fitment, pretty flush with the Pilot Sports.
Test fitment @ Supreme Power. Wheels were mounted on some Nexen tires which didn't provide much of a sidewall.
Front fitment, pretty flush with the Pilot Sports.
Last edited by bryant_is_bored; 11-01-2015 at 12:51 PM.
The following users liked this post:
bryant_is_bored (07-20-2016)
#4
Member
Thread Starter
I like the H&R setup. I've had Eibach before with JDM cars, but go with H&R for the euro applications. Will get Koni Yellows to compliment the springs in the future. I didn't wanna go all out and get coils as I'm not that particular with the ride height and I have no plans to track the car so I felt no need to spend the extra $$$ to tinker with it.
The following users liked this post:
dCLA503 (11-27-2016)
#5
Perfect! Looks like hr springs is in store for me. I need to lower my for more aggressive look. Any camber problem? If so, what do you recommend for part to get the alignment correctly? Thank you!
#6
Member
Thread Starter
Haven't had any camber issues that I'm aware of.... Been getting the tires rotated every 3k miles & the tech has not made any comments about uneven wear. The set has been on since Oct. '15. I do have an SPC rear camber kit sitting on my desk, but haven't thought to have it installed.