Starts, stall, restarts and then runs fine?

MickM · 01-28-2012, 03:14 AM

99CLK 320 runs great but when it's shut off for a short time it stalls? Ex. Stop to get dry cleaning, shut car off, back in like three or four minutes and it starts, stalls then restarts and runs fine. Only does it when it's but recently run? Have tried search but no results, maybe I'm not describing it right. It's not only anoying it's embarrassing.

To remove this ad, register today or login if you already are registered!

MickM · 01-28-2012, 08:14 PM

Really need some help on this.

MarcusF · 01-28-2012, 11:47 PM

There really isn't much to go on here. A stab in the dark is the cramkshaft position sensor. Although it could just as easily be the camshaft sensor. Without info such as the codes, it's mainly guesswork. The cramkshaft position sensor is somewhat common. Although some of us have never had to replace ours.

01-28-2012, 11:47 PM	#3
MarcusF MBWorld Fanatic! Garage is empty, add now Join Date: Apr 2005 Location: SCV SoCal Posts: 2,785 Drives: FIA approved Pumas	There really isn't much to go on here. A stab in the dark is the cramkshaft position sensor. Although it could just as easily be the camshaft sensor. Without info such as the codes, it's mainly guesswork. The cramkshaft position sensor is somewhat common. Although some of us have never had to replace ours. __________________ Mercedes-Benz Performance and Spec page ♦ Signal to Noise Los Angeles Section of the Mercedes-Benz Club of America ♦ Orange County Section of the Mercedes-Benz Club of America

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

01-28-2012, 08:14 PM	#2
MickM Junior Member Garage is empty, add now Join Date: Sep 2011 Location: Ormond Beach, FL Posts: 42 Drives: 1999 CLK 320 Carbo	Really need some help on this.

01-28-2012, 11:47 PM
MBWorld Mercedes SLR McLaren Paid Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)