FS: Custom 4-Point Bolt-In Roll Bar
#1
Newbie
Thread Starter
Join Date: Jul 2011
Location: Seattle, WA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Harley Sportster
FS: Custom 4-Point Bolt-In Roll Bar
I built this custom 4 point roll bar for a good friend of mine who owns a Black Series and now I need to send this roll bar off to a new home. He has decided to go a different route with the car and is going to need something a little different than what we had originally planned. The roll bar is tig welded and constructed with 1-3/4" .095 DOM tubing which is industry standard. I am looking to get $3,000 obo for the roll bar. The bar is still bare metal and can be powdercoated any color the buyer chooses at no extra cost. Any question please feel free to ask
Shaefferryan@gmail.com
4130 billet tube clamps
sanded and cleaned ready for welding
base plates are now welded on
Cheers
Ryan
Shaefferryan@gmail.com
4130 billet tube clamps
sanded and cleaned ready for welding
base plates are now welded on
Cheers
Ryan
Last edited by Flavourless; 07-13-2011 at 01:39 PM.
#3
Newbie
Thread Starter
Join Date: Jul 2011
Location: Seattle, WA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Harley Sportster
Thank you. This would be ideal for anyone that wants to track their car. Not to mention when you see it in the car and see the x brace in the back and both diagonals and harness bar in the car with seats it looks wicked. The angle of the main hoop matches the angle of the side windows as well so when the windows are up it's all symmetrical.
#7
Newbie
Thread Starter
Join Date: Jul 2011
Location: Seattle, WA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Harley Sportster
Anyways I will see if I can get a weight on this some how for you.
Last edited by Flavourless; 07-20-2011 at 02:11 PM.