jgdynamics

Just thought I'd try my luck here. Sorry if i offended anybody with 18" wheels.


18" CCW C10 Powder coated Wrinkle Finish Matte Black
- 6061-T6 Forged Aluminum
- CNC Machined
- TPMS Compatible
- Accommodates AMG big brakes

Front
18x10 ~+35

Rear
18x11 ~+44

looking for $1700
Willing to ship, buyer pays for shipping.
Located in Los Angeles,Ca

Thanks in advance.

MOFLO

Can you confirm these will fit a CLK63BS?

Thanks!

jgdynamics

As far as bolt pattern, they are a fit. Width of stock wheels are 9 +25 and 9.5 +31, my CCW are 10 +35 and 11 +44. With the offsets, the difference in front and rear are

Front
Inner Clearance= 23mm less
Outer Position= +3mm farther out

Rear:
Inner Clearance= 32mm less
Outer Position= +6mm farther out

Hopefully someone can chime in to confirm these offset work, but i am pretty certain they do.

Thank you for the question MOFLO. Hopefully this helps.

GeoGeo

I actually have a set just like that getting made for me. However, that offset is not going to work with the BS at all. Surprisingly the 18s WILL clear the front control arm, but that offset will push the wheel in way too much and hit the struts.

MOFLO

Thank you both for the insight! ;-)

sick430

For that price, you could always just run some spacers!

MOFLO

True but rather not do that since I would only use these wheels for track days.

Thanks!

1JDM911

smh, price is certainly not the issue around this side of the board.

jgdynamics

everything is sold. please close! thank you