primecut

Anyone tried to take these things off to get to the bulbs? I tried prying from 30 different angles and it just doesn't seem possible from the outside... There must be a hook inside that's keeping it in. Do I have to do this from inside the fender? Anyone has an easy technique to share? The warning message is bugging me. Thanks in advance!!!

COOPERDB

`


https://mbworld.org/forums/clk55-amg...ker-light.html


Not sure if you have viewed this thread

If not hope this helps

Thank-You
D.B.

`

primecut

Thanks. Yea I saw that but they have different side markers on the non BS so that technique didn't work for me.

MJ50

it's safest to remove fender liner...
that way, u can just swap the bulbs without removing the sidemarker...
not the easiest method, but u don't want to take chances with the paint...

stewarjm1

Concur...had to do same to replace a bulb. Great design MB.

primecut

Thank you guys! Took your advice and turned the wheel to get through the fender liner and worked like a charm! The marker also came out pretty easily from the inside if needed. Just an FYI the passenger side is tighter but still reachable.

MJ50

Derekm15

good tip!