Nickgsmith1

Would appreciate input concerning access and replacement procedure of Glow Plugs on my 2005 B180 Diesel. Haven't been able to find any information on the subject in my Workshop Manual for my vehicle. Clearly access is restricted to the glow plugs and will mean removing various parts and components. Also I understand that care has to be taken in trying to remove glow plugs in case of breakage. However, at some future date I may have to replace them and understand the procedure involved. Thanks for any help in advance. Nick

Plutoe

If you have a 246.207 CDI Sports Touer with a 651.930 than it is a simple process__
remove cover
remove vacuum line
unclip the wiring harness
remove glow connector
xxxxx important if the releasing torque is 25Nm or more---stop run the engine to temp and then restart glow plug removal
installed torque is 11Nm