2000 E430 water pump replacement
07-22-2019, 08:11 AM
#1
Junior Member
Thread Starter
2000 E430 water pump replacement
Am preparing to replace the WP on my 2000 E430 (254,000 mi). The cooling fan is threaded onto the WP. I have no idea how to remove the fan, is a strap wrench on the pulley sufficient? Also I have seen numerous videos on the replacement of WP's some showing the removal of the radiator and some not requiring the radiator removal. Suggestions?
The following users liked this post:
jbodentrader (07-22-2019)
07-22-2019, 09:32 AM
#4
Super Member
Join Date: Nov 2001
Location: Henrico, Virginia
Posts: 763
Likes: 0
Received 50 Likes
on
39 Posts
2014 ML350 4Matic
There are two special tools for fan removal. I have provided a link below so you can see what they look like. I don't think a strap wrench will work.
07-22-2019, 01:20 PM
#6
MBWorld Fanatic!
Join Date: Jan 2009
Location: V E G A S
Posts: 9,067
Received 1,730 Likes
on
1,380 Posts
1922 Ford Model T / no OBD
If you have big hex on the clutch that threads into pump shaft, the best way to remove it is air chisel.
You apply it to corner of the hex and in 2 seconds it will go out with hand turn.
You will find youtube videos how mechanics do it on Ford Powerstrokes.
You apply it to corner of the hex and in 2 seconds it will go out with hand turn.
You will find youtube videos how mechanics do it on Ford Powerstrokes.
