Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**

[Don Nguyen]

I don't normally post pictures of kind of off/side projects that aren't from the normal roof, window trim, etc. However, I figure I'll start posting them more since I've had quite a few requests or people ask me about this. Here's a SC400 that I vinyl wrapped the lower lip on the bumper in the 3M 1080 glossy carbon fiber vinyl material. The lip was fairly damaged, hence the crack which you can clearly see through the material and some other small chips along the bottom edge of the lip. I do not usually wrap lips, since they require a seam line in the middle, due to the lengths that lips usually are (~7'-8'). In the picture taken front on, you can see the small seam line a couple of inches to the left of the crack. To some that may be acceptable, while to others it may be something they'll always see/notice. Hopefully this will give you guys somewhat of a better idea of how it'll work/look. -Don donathon@gmail.com

To remove this ad, register today or login if you already are registered!

[Don Nguyen]

It's not often I get bigger bodied cars like this E65 745il come by to have vinyl work done on their cars. However, the owner of this car contacted me to see if I could black out the chrome on his window trim, to give it the shadowline look. We ended up going with the matte black finish over the gloss black finish so that it'd match the rubber around the windows and the already matte door pillar pieces. The owner of this car was from Los Angeles area and drove out to me in Orange County to have the vinyl work done.















-Don

donathon@gmail.com

[Don Nguyen]

Here is a black Mercedes Benz CLS63 AMG that came by to have me vinyl wrap his chrome window trim in my matte black vinyl material to black it out. The owner of this car was also from Irvine/South Orange County and came out to me in Anaheim Hills to have the vinyl work done. I think the matte black still goes fairly well on the black car, since the trim does not just blend in with the rest of the car, but still accents the trim pieces nicely.







After:














-Don

donathon@gmail.com

[Don Nguyen]

This is something different than what you guys are used to seeing me post. I vinyl wrapped the center/raised portion of the hood on this white BMW E92 M3 with my matte black vinyl material. Of course, the roof on this car was already carbon fiber, so I did not have to do anything with that. However, the owner of this car wanted to give it a more aggressive look without it being permanent and no other vinyl shops were willing to do this on his car. Luckily he found me, and I've done this for several cars in the past before, so it wasn't a problem. Owner of this car was from around south Orange County and came over to me in Anaheim Hills.

















-Don

donathon@gmail.com

[Don Nguyen]

The owner of this car came out to me in Orange County from around Los Angeles somewhere to get the roof of his silver 350z wrapped in my gloss black vinyl material.

Before:




After:











-Don

donathon@gmail.com

[Don Nguyen]

Usually when I black out window trim it is because they are chrome/brushed aluminum, but in this case, the originally black window trim on this car had just faded to a copperish metal hue. So what I did was just applied some of my gloss black vinyl material onto the lower window trim pieces and on the small rear quarter window vertical pillar that had also faded.

If there is enough interest in this, I can set up a group buy type of deal for it and have a group of you guys come by in on an assigned day to all get it done.

Before:




During (only the lower rear door trim piece is covered in the gloss black vinyl in these pictures):






After:








-Don

donathon@gmail.com

[Don Nguyen]

I've had quite a few requests for tinting tail lights recently, so I decided to post up some more pictures of them for you guys. The owner of this car was actually a firefighter at a station local/right down the street from me in Irvine, so I dropped by there to tint/smoke the tail lights and the top portion of the headlights on his black E60 550i.

Tinted/smoked left side, stock/untinted right side:




Both sides tinted:


Top portion of the headlights tinted/smoked:




-Don

donathon@gmail.com

[Don Nguyen]

I worked on this black Bentley GT Continental coupe a while back. He brought his car by to have me black out the chrome window trim on his car. Originally he was going to go with gloss black, but once he got here we decided to go with the matte black to still give the covered pieces some contrast with the rest of the car. Also wrapped the chrome accents that were along the bottom of the car and his door handles. He was around Mission Viejo or so and came out to me in Anaheim Hills/Orange County.

Before:




After:














-Don

donathon@gmail.com

[Don Nguyen]

One of my previous customers that had me vinyl wrap the roof on his 335i E92 sold his car and got a new car. He purchased the new limited edition matte black C63 coupe from Mercedes. Everything looked good on the car, except for the chrome window trim that blatantly stood out, especially against the matte black paint on the rest of the car. It's not often that I get a matte black car that comes in to have their window trim vinyl wrapped. He decided to go with gloss black for the window trim, to give it some contrast still, and I think it turned out great.

Before:




After:








-Don

donathon@gmail.com

[Don Nguyen]

I'll try and change things up a bit here. Here's a silver Honda Civic that came by to get his roof wrapped in my matte black vinyl material versus gloss black which most people usually go with. This will help others who have a silver car or a glass sunroof and want to see what a matte black vinyled roof would look like on their car and how it contrasts, etc. The owner of this car was from Irvine/Orange County as well.

Before:




After:








Blacked out the chrome trunk handle piece on the rear:


-Don

donathon@gmail.com

[13bArtillery107]

I have a 2000 e430 4matic, and I might be wanting to do the window pillars in cf, Could I get some kind of a price estimate? Also what all materials do you have available for use? I live in pittsburgh pa, so having you install it is pretty much out of the question. I'm basically talking material.

[Don Nguyen]

Just the two center pillars and the rear pillar for the smaller quarter window?


-Don

[13bArtillery107]

Yes, on both sides.

[Don Nguyen]

Pm sent.

[Don Nguyen]

Trying to gauge if there is any interest in this flat black vinyl finish. I haven't posted pictures of this finish/material before, but I recently had a someone ask if I had something that was flatter than my matte black vinyl material. So, who's interested?

Flat black is on the left and matte black is on the right:




-Don

donathon@gmail.com

[Don Nguyen]

I've been running a special on the 3M Di-noc matte carbon fiber vinyl wraps and the owner of this silver ISF drove up from San Diego to me in Orange County to have it done. This is the matte carbon fiber finish. I wrapped both his roof and his side door pillars with the 3M di noc material. I thought it looked great against the silver paint/color of the car. The cf pattern really gave this ISF a more aggressive presence. It also matched the darker wheels fairly well also.

Before:




After:
















-Don

donathon@gmail.com

[Don Nguyen]

Nothing fancy this time around. I vinyl wrapped the trunk handle, which was the last piece of chrome that was on this sapphire black 550 GT. The owner of this car was in Irvine as well. This will help out those who've asked me what my gloss black vinyl material looks like against metallic black paint/finishes. There's still a slight contrast to it, which I think is cool, so it still accents the trim pieces on the car a bit versus just blending in completely.







-Don

donathon@gmail.com

[Don Nguyen]

Even though I mainly specialize in European cars, interestingly enough, I have still had quite a few of these new Kia Optimas come by to get work done on their cars. I had this customer e-mail me to see if I could vinyl wrap the roof of his white Kia Optima with my gloss black vinyl material to give the roof that panoramic roof look/effect. Even though the roof of this car protruded outwards in the middle, unlike most cars, I was still able to wrap the roof without any issues.











-Don

donathon@gmail.com

[Don Nguyen]

I vinyl wrapped the roof of this brand new white Mercedes-benz C250 with my gloss black vinyl material. The owner of this car was from around the Los Angeles/Torrance area and drove out to me in Orange County to have his roof done. It's always fun seeing new car models/face lifts come out and come by to get some vinyl work done.









-Don

donathon@gmail.com

[Don Nguyen]

Did this one probably a year ago, but just realized that I never posted pictures of it. It is a black G37 sedan that I vinyl wrapped the roof in the 3M Di-noc matte carbon fiber finish. It's not often that I get black cars coming by to get their roofs wrapped, so this is good for those out there who have darker colored cars or black cars to get an idea of how the carbon fiber would look on your roofs. It gives it a nice contrast. From far away it looks flat-ish, but once you get up closer, you start seeing the design and carbon fiber weave pattern. The owner of this car was from around south Orange County I believe.

Remember, I am having a discounted special on all 3M dinoc carbon fiber installs right now as well. So hit me up if you're interested. Now's a good time to get it done.











-Dom

donathon@gmail.com

[Don Nguyen]

The owner of this silver Corvette contacted me to see if I could vinyl wrap his T-top and roll hoop with my matte black vinyl material/finish. I don't get too many domestic cars coming by to get vinyl work done, so this was a nice change of pace. I personally think that the matte black top gave this car a clean look but also a more aggressive stance at the same time. Almost even made the car look longer, because the black was continuous from the front of the windshield to the back of the trunk/rear window now. The owner of this car was around south Orange County and came over to me to have the vinyl work done.

Before:




After:












-Don

Donathon@gmail.com

[Don Nguyen]

Here is a silver TL type S that came by to have me vinyl wrap the roof of his car with my gloss black vinyl material. He drove out from around the Inland Empire/Riverside area to me in Orange County to have it done. I really liked the way the roof turned out/looked on this car. A gloss black roof on a silver car gives the car a very clean, simple, and elegant look.













-Don

donathon@gmail.com

[Don Nguyen]

I have people always asking me how well my material holds up over time and how long does it last. Well, here is a black MkV VW GTI that I did roughly 2 - 2.5 years ago. I vinyl wrapped the center section of his grill in my matte black vinyl material. This is as exposed to road debris and wear and tear as any wrap is going to get, being on the front of the bumper. There are some nicks here and there from sharp rock chips/hits, but nothing out of the ordinary that you wouldn't expect to see on a car's front bumper that's been daily driven for the last couple of years.







-Don

donathon@gmail.com

[Don Nguyen]

This white Lexus IS350 dropped by to have me vinyl wrap the roof of his car with my gloss black material. Hopefully these pictures will help out those who have carbon fiber hoods see how the gloss black vinyl roof matches/looks with a carbon hood. I thought that the gloss black vinyl roof complimented the carbon fiber hood and other carbon fiber/black accents on the car fairly well. The owner of this car was from around Cerritos and came out to me in Anaheim Hills/Orange County to have the work done.























-Don

donathon@gmail.com

[Don Nguyen]

I had this new white Mercedes Benz C class coupe come by to have me wrap his chrome/brushed aluminum window trim in my gloss black vinyl material. He wanted to go with the gloss black to match the glass panoramic roof and to also match the B pillars on the door, which were also gloss black already from the factory. I should have taken the after pictures of it outside so you guys can get a better view/look, but for some reason this time I took the pictures of the car inside. The owner of this car was from around Buena Park and drove out to me in Anaheim Hills/Orange County to get the work done. I have a lot of guys ask me if they should go with matte or gloss black on their window trims, so hopefully this will help those of you out trying to figure what to go with.

Before




After










-Don

donathon@gmail.com