You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Hi - I recently installed E55 front calipers and E63 rear calipers on my 2008 E320 bluetec. I've pressure bled the system, but the pedal seems to depress about 1/2 way before engaging the brakes. As the calipers are so much larger than stock, is there something that needs to be done to the SBC controller, etc? It's possible I didn't bleed them correctly, but used a high quality pressure bleeder, and was getting no air out of any of the calipers, and bled in proper sequence. I checked the EPC, and the master cylinder is the same PN on my Bluetec as on the E63. The SBCs have a different part number however. Any advice will be greatly appreciated.
To remove this ad, register today or login if you already are registered!