Different height after replacing rear air springs
11-19-2014, 09:58 AM
#1
Newbie
Thread Starter
Join Date: Oct 2012
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
GL320 CDI
Different height after replacing rear air springs
Replaced my 2008 GL320 CDI rear air springs with arnott parts last weeks, dash shown twice suspension malfuntion, but once restart engine malfuntion goes away.
So...today I found out both sides have around 1.5" of height difference, does it need some type of calibration? or arnott part issue?
So...today I found out both sides have around 1.5" of height difference, does it need some type of calibration? or arnott part issue?
11-19-2014, 01:51 PM
#2
Former Vendor of MBWorld
Arnott Tech Support
Replaced my 2008 GL320 CDI rear air springs with arnott parts last weeks, dash shown twice suspension malfuntion, but once restart engine malfuntion goes away.
So...today I found out both sides have around 1.5" of height difference, does it need some type of calibration? or arnott part issue?
So...today I found out both sides have around 1.5" of height difference, does it need some type of calibration? or arnott part issue?
I asked Marvin Arnott's Tech Support Lead and he replied, "It may settle automatically, but I’d recommend having the height sensors recalibrated or at least checked to make sure that the sensors are within spec."
You can reach Arnott Tech Support at: techassistance@arnottinc.com or by calling 321-868-3016 X 100.
