Aiming windshield washers?
#1
Member
Thread Starter
Join Date: Jan 2005
Location: Orange County, CA
Posts: 178
Received 20 Likes
on
14 Posts
GLA250 4Matic, 911 Carrera S, R1250 GS Adv.
Aiming windshield washers?
How do you aim the nozzles without breaking something? Each one seems to have a rectangular fluid nozzle hole with rectangular slots above and below - all housed in a circular moveable piece. I'd like to get the spray so that it hits the windshield about 2/3 of the way up, but adjusting with a pin in the hole isn't going to work on these nozzles.
#3
Member
Be carefull on this, if you break the nozzle, you will have to replace whole hose from washer reservoir to windshield with all three nozzles...it is one part, I had to let mercedes replace it because of melted plastic join to the pump...it was shortcut on it (I have heated nozzles)...