Trailer OEM wiring problem
#1
Junior Member
Thread Starter
Join Date: Jul 2015
Location: Canada
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
2010 GLK 350
Trailer OEM wiring problem
Hi Guys
I just bought a 2010 GLK 350 last week with OEM tow package and this week end I have check if all the current was there on the 7 pins connector before hooking a trailer ,but I notice that I may have a problem.
when I check with a 12v test light the parking light only blink and does not stay on, the Right turn does not blink too
I have current on the pin that says "positive" and the Left turn work (test light blink like the Left turn on the GLK light)
I did not test brake I was alone so
can somebody help me!
Thanks
I just bought a 2010 GLK 350 last week with OEM tow package and this week end I have check if all the current was there on the 7 pins connector before hooking a trailer ,but I notice that I may have a problem.
when I check with a 12v test light the parking light only blink and does not stay on, the Right turn does not blink too
I have current on the pin that says "positive" and the Left turn work (test light blink like the Left turn on the GLK light)
I did not test brake I was alone so
can somebody help me!
Thanks
#3
Junior Member
Thread Starter
Join Date: Jul 2015
Location: Canada
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
2010 GLK 350
it does the same with trailer connected....I have LED light, I saw that could be a problem too because it does not draw enought current....can it be program for LED??
#4
MBWorld Fanatic!
Look this over - to see if it "fits" your application :
http://www.etrailer.com/Wiring/Tow-Ready/TR20141.html
http://www.etrailer.com/Wiring/Tow-Ready/TR20141.html