99 ML320 with 210k No Start No Turn
05-16-2015, 06:22 PM
#1
Newbie
Thread Starter
Join Date: Apr 2009
Location: Chino Hills, CA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
03 BMW 530i, '00 ML320
99 ML320 with 210k No Start No Turn
Hi I have a ML320 that's been abandoned for a while.
Pretty much one day I took it out to the store, took about half hour, when I got out and tried turning it, it would not turn on. So I had to tow it. After that I just left it on my driveway.
6 months later, I'm back trying to see what's the problem. Got my BMW 530i's battery, hooked it up. It clicks but that's it. There's also a whining noise like when the fans are on. But the fans are not on. All the dash lights work. Hook it up to the scanner and there's no codes store. I'm assuming that's because I disconnected the battery, though. I'm more knowledgeable with BMW's. This was my dad's ML320 and just passed it on to me. So I'm trying to revive the ML but need help. I read some post that people posted with similar symptoms and mentioned about the ECM, AAM, starter or a fried key?? Help is much appreciated.
Here's some videos of my problem
Pretty much one day I took it out to the store, took about half hour, when I got out and tried turning it, it would not turn on. So I had to tow it. After that I just left it on my driveway.
6 months later, I'm back trying to see what's the problem. Got my BMW 530i's battery, hooked it up. It clicks but that's it. There's also a whining noise like when the fans are on. But the fans are not on. All the dash lights work. Hook it up to the scanner and there's no codes store. I'm assuming that's because I disconnected the battery, though. I'm more knowledgeable with BMW's. This was my dad's ML320 and just passed it on to me. So I'm trying to revive the ML but need help. I read some post that people posted with similar symptoms and mentioned about the ECM, AAM, starter or a fried key?? Help is much appreciated.
Here's some videos of my problem
Last edited by blackhawkimpact; 05-16-2015 at 06:33 PM.
05-17-2015, 03:01 AM
#2
Newbie
Join Date: May 2015
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
ml320
Starter spinning and not engaging flywheel.
Sometimes the bendix gets stuck on cars. Not familiar with ml specifically but you may be able to tap the starter to free it if this is the case.
Otherwise it could be a broken gear/tooth in either the starter or flywheel.
Sometimes the bendix gets stuck on cars. Not familiar with ml specifically but you may be able to tap the starter to free it if this is the case.
Otherwise it could be a broken gear/tooth in either the starter or flywheel.
