lordofthering

I had code P2006 code in my 2008 ML 350 (W164) and my mechanic changed
MotorKing Mercedes Benz Intake Manifold Air Flap Runner Repair Kit (Bought from Amazon). Plastic part of Actuator was broken. So it fixed P2006 code but now I have P0106 and P1205 code which was not there before(I think). Can anyone tell me what else went wrong during this process?. Mechanic who changed Mainfold Air Flapper kit know how to change if you tell him what needs to be changed but does not know troubleshooting. If I can give him hint he can look for it and find the problem. Dealer is too expensive.

Can someone tell me what could be the issue ? Vacuum line is open ? or Some Throttle Valve open ? or connector open ?. I am hoping we do not have to open Air Intake body again.

Davidjgonzlz

Was wondering if u ever figured out the problem.. Just replaced the flap runner as u did and now getting code P2015
wondering if u had any luck thanks.

lordofthering

Yes, was able to resolve issue by replacing vacuum lines connecting to Intake Manifold (22/6, 22/9). If I remember correct, I removed air Pump in front for better access. Basically Vacuum lines were loose which was causing Air Intake not to operate properly. My mechanic should have done this when he was replacing flapper, but he did not. It was not too difficult to replace accessible vacuum line associated with Air Intake.

I hope you may able to resolve your issue

ml3204me

One viable solution for your problem is found in the video below: