2011 ML550 Skid Plate Finish Bubbling
#1
Newbie
Thread Starter
Join Date: May 2008
Location: North Kackalacky
Posts: 11
Likes: 0
Received 1 Like
on
1 Post
1999 ML430 & 2011 ML550
2011 ML550 Skid Plate Finish Bubbling
Hey all,
Has anybody had issues with the finish of their skid plate bubbling up? I was cleaning my truck this past weekend and noticed that the finish was bubbled.
I figure that there's some rust going on underneath the finish. I thought the skid plate was solid stainless steel but based on what I see it looks like it's not. The bubbles have not broken yet but I fully expect for them to in the future.
Any recommendations for where to source a new or even used one for future reference?
Has anybody had issues with the finish of their skid plate bubbling up? I was cleaning my truck this past weekend and noticed that the finish was bubbled.
I figure that there's some rust going on underneath the finish. I thought the skid plate was solid stainless steel but based on what I see it looks like it's not. The bubbles have not broken yet but I fully expect for them to in the future.
Any recommendations for where to source a new or even used one for future reference?
#2
MBWorld Fanatic!
I think that you likely have to replace the whole bumper cover. It doesn't look like this is sold as a separate OEM part.
You can always check eBay or Aliexpress.com for an aftermarket part. Or you can check scrap yards undamaged ones.
You can always check eBay or Aliexpress.com for an aftermarket part. Or you can check scrap yards undamaged ones.