Mboutamer

Hi I have a Mercedes CLA 200 W117, purchased as an accident car, repaired all vehicle replaced all airbags including terminal, all faults were cleared 0 fault codes reading with Xentry scan tool. Car won't start no crank just a tick. Help please!
Vin number WDD1173432N005271

Plutoe

I would start with the following==If you have Xentry then you must also have WIS. If that is the case look to wiring diagrams PE0710P2705971AC and PE5415P21061AA--check all the relays in the F58 module(engine compartment fuse and relay module)--three of them are in the ignition and starting systems!!