baldguy

Hi guys,

Can I get some advise/expertise from you on hub centric spacers. I'm not a stranger to decent hub centric spacers on previous cars, but some say yes on my car and some say don't do it....
I want to bring the backs out 20mm and the front 10mm..... Any advice from anyone who's done this as to yes or no?
Will it affect anything? It will also be running a Renntech ELM soon

Cheers Greg

xxGenericSNxx

Wow I want to do the EXACT same thing. I'm thinking 20mm out back and 10mm on front. I was looking at the H&R DRA 20mm in back which will allow me to use the stock bolts. (the spacers bolt onto the hub and you bolt the wheel to the spacers)

I'm kind of waiting it out and see if others have done this and if there's any rubbing issues or vibrations, etc. because I'm thinking to lower my rear 1".

Please keep me updated on what you decide to do. But from my reading, H&R seem to be the best quality.

xxGenericSNxx

vinyl bump

Staff@WORLD

If you guys need the spacers I can get them out to you right away. 25mm and 10mm would not be a problem at all. We also have bolts in chrome and black available to go along with the spacers.

Let me know what you guys need and I will get it taken care of right away.

-Craig