c3nthusiast

So I read about how to do this on several sites and they all basically said the same thing. Most involved a 9" needle nose pliers. Well I figured out a much easier way that will take you 20 minutes to do both sides. All you need is a short pair of pliers and a 10mm ratchet.

1. Remove the two 10mm headlight bolts. If you pull the headlight out a bit you can see the plug.

2. Maneuver your pliers behind the headlight And grad the plug. Turn it counter clockwise almost a full quarter turn then pull it out.

3. Just reverse the process to put it all back together.